All MIBs › MULTIPLE-BRIDGE-MIB › atiSwitchIPAddress

atiSwitchIPAddress

OID (symbolic): MULTIPLE-BRIDGE-MIB::atiSwitchIPAddress

OID (numeric): 1.3.6.1.4.1.207.8.3.3.1

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: Since bridges can now be accessed without an IP address, there needs to be a way to find out there addresses.

What is atiSwitchIPAddress?

The switch's management IP address; documented here because these bridges can otherwise be accessed without any IP configured, so this object gives a way to discover or set one.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.3.3.1
snmpwalk -v2c -c public <target> MULTIPLE-BRIDGE-MIB::atiSwitchIPAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.3.3.1.1
snmpget -v2c -c public <target> MULTIPLE-BRIDGE-MIB::atiSwitchIPAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.3.3.1.1 a <value>

Start monitoring Multi-bridge-capable network switch (vendor-neutral BRIDGE-MIB extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MULTIPLE-BRIDGE-MIB::atiSwitchIPAddress OID value, configure state conditions and alerts, and monitor any Multi-bridge-capable network switch (vendor-neutral BRIDGE-MIB extension) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.207	alliedTelesyn	AT-RG600-MIB
1.3.6.1.4.1.207.8	mibObject	AT-RG600-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.207.8.3	atiSwitchObjs	MULTIPLE-BRIDGE-MIB
1.3.6.1.4.1.207.8.3.3	atiSwitch	MULTIPLE-BRIDGE-MIB
1.3.6.1.4.1.207.8.3.3.1	atiSwitchIPAddress	MULTIPLE-BRIDGE-MIB

MULTIPLE-BRIDGE-MIB :: atiSwitchIPAddress

atiSwitchIPAddress

Also defined in

Module

This MIB depends on