All MIBs › MRV-IN-REACH-SYSTEM-MIB › sysTimeProtocol
sysTimeProtocol
Module: MRV-IN-REACH-SYSTEM-MIB
OID (symbolic): MRV-IN-REACH-SYSTEM-MIB::sysTimeProtocol
OID (numeric): 1.3.6.1.4.1.33.1.90
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether the SNTP protocol is used to obtain the time at startup. If disabled, the older TIMED protocol is used. Both protocols run over UDP.
What is sysTimeProtocol?
This selects whether SNTP (enabled) or the older TIMED protocol (disabled, the default) is used to obtain the time at startup. Both protocols run over UDP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.33.1.90 snmpwalk -v2c -c public <target> MRV-IN-REACH-SYSTEM-MIB::sysTimeProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.33.1.90.1 snmpget -v2c -c public <target> MRV-IN-REACH-SYSTEM-MIB::sysTimeProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.33.1.90.1 i <value>
Start monitoring MRV In-Reach terminal/console server (system identity/firmware) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MRV-IN-REACH-SYSTEM-MIB::sysTimeProtocol OID value, configure state conditions and alerts, and monitor any MRV In-Reach terminal/console server (system identity/firmware) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.33 | iTouch | ITOUCH-MIB |
| 1.3.6.1.4.1.33.1 | xSystem | ITOUCH-SYSTEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.33.1.90 | sysTimeProtocol | MRV-IN-REACH-SYSTEM-MIB |