All MIBs › MPLS-VPN-MIB › mplsVpnVrfConfRouteMaxThreshTime
mplsVpnVrfConfRouteMaxThreshTime
Module: MPLS-VPN-MIB
OID (symbolic): MPLS-VPN-MIB::mplsVpnVrfConfRouteMaxThreshTime
OID (numeric): 1.3.6.1.3.118.1.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Denotes the interval in seconds, at which the route max threshold notification will be re-issued after the maximum value has been exceeded (or has been reached if mplsVpnVrfConfMaxRoutes and mplsVpnVrfConfHighRouteThreshold are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. The default value is 10 minutes (600 seconds). If this value is set to 0, the agent should only issue a single notification at the time that the maxium threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value.
What is mplsVpnVrfConfRouteMaxThreshTime?
Sets how often, in seconds (default 600), the route-max-threshold notification is reissued after a VRF's route count first exceeds its configured maximum; a value of 0 makes the agent send just one notification per threshold crossing instead of repeating it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.118.1.1.6 snmpwalk -v2c -c public <target> MPLS-VPN-MIB::mplsVpnVrfConfRouteMaxThreshTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.118.1.1.6.1 snmpget -v2c -c public <target> MPLS-VPN-MIB::mplsVpnVrfConfRouteMaxThreshTime.1
Start monitoring Vendor-neutral IETF standard (MPLS/BGP provider-edge router, VPN/VRF) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-VPN-MIB::mplsVpnVrfConfRouteMaxThreshTime OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS/BGP provider-edge router, VPN/VRF) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.118 | mplsVpnMIB | MPLS-VPN-MIB |
| 1.3.6.1.3.118.1 | mplsVpnObjects | MPLS-VPN-MIB |
| 1.3.6.1.3.118.1.1 | mplsVpnScalars | MPLS-VPN-MIB |
| 1.3.6.1.3.118.1.1.6 | mplsVpnVrfConfRouteMaxThreshTime | MPLS-VPN-MIB |