MPLS-TE-STD-MIB :: mplsTunnelPerfErrors

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-TE-STD-MIBmplsTunnelPerfErrors

mplsTunnelPerfErrors

Module: MPLS-TE-STD-MIB

OID (symbolic): MPLS-TE-STD-MIB::mplsTunnelPerfErrors

OID (numeric): 1.3.6.1.2.1.10.166.3.2.9.1.3

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: Number of packets dropped because of errors or for other reasons.

What is mplsTunnelPerfErrors?

Counts packets dropped by this tunnel because of errors or other reasons. An admin watches this counter alongside mplsTunnelPerfPackets to gauge the tunnel's packet-loss rate and spot a degrading LSP.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.9.1.3
snmpwalk -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelPerfErrors

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.9.1.3.1
snmpget -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelPerfErrors.1

Start monitoring Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-STD-MIB::mplsTunnelPerfErrors OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.166.3mplsTeStdMIBMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2mplsTeObjectsMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.9mplsTunnelPerfTableMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.9.1mplsTunnelPerfEntryMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.9.1.3mplsTunnelPerfErrorsMPLS-TE-STD-MIB