MPLS-TE-STD-MIB :: mplsTunnelNotificationEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-TE-STD-MIBmplsTunnelNotificationEnable

mplsTunnelNotificationEnable

Module: MPLS-TE-STD-MIB

OID (symbolic): MPLS-TE-STD-MIB::mplsTunnelNotificationEnable

OID (numeric): 1.3.6.1.2.1.10.166.3.2.11

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: If this object is true, then it enables the generation of mplsTunnelUp and mplsTunnelDown traps, otherwise these traps are not emitted.

What is mplsTunnelNotificationEnable?

Enables generation of mplsTunnelUp and mplsTunnelDown traps when true; when false, these traps are suppressed, defaulting to false. An admin enables this to get SNMP notifications whenever an MPLS TE tunnel's operational status transitions, rather than relying solely on polling.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.11
snmpwalk -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelNotificationEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.11.1
snmpget -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelNotificationEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.166.3.2.11.1 s <value>

Start monitoring Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-STD-MIB::mplsTunnelNotificationEnable OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.166.3mplsTeStdMIBMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2mplsTeObjectsMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.11mplsTunnelNotificationEnableMPLS-TE-STD-MIB