All MIBs › MPLS-TE-STD-MIB › mplsTunnelIndexNext
mplsTunnelIndexNext
Module: MPLS-TE-STD-MIB
OID (symbolic): MPLS-TE-STD-MIB::mplsTunnelIndexNext
OID (numeric): 1.3.6.1.2.1.10.166.3.2.1
Node type: OBJECT-TYPE
Type: IndexIntegerNextFree
Access: read-only
Description: This object contains an unused value for mplsTunnelIndex, or a zero to indicate that none exist. Negative values are not allowed, as they do not correspond to valid values of mplsTunnelIndex.
Note that this object offers an unused value for an mplsTunnelIndex value at the ingress side of a tunnel. At other LSRs the value of mplsTunnelIndex SHOULD be taken from the value signaled by the MPLS signaling protocol.
What is mplsTunnelIndexNext?
Returns an unused value to use as mplsTunnelIndex for a new tunnel, or zero if none are available; it's only meaningful for allocating an index at the ingress side of a tunnel. An admin's provisioning tool reads this before creating a new MPLS TE tunnel row to avoid an index collision.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.1 snmpwalk -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelIndexNext
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.1.1 snmpget -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelIndexNext.1
Start monitoring Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-STD-MIB::mplsTunnelIndexNext OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.166 | mplsStdMIB | MPLS-TC-STD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.166.3 | mplsTeStdMIB | MPLS-TE-STD-MIB |
| 1.3.6.1.2.1.10.166.3.2 | mplsTeObjects | MPLS-TE-STD-MIB |
| 1.3.6.1.2.1.10.166.3.2.1 | mplsTunnelIndexNext | MPLS-TE-STD-MIB |