MPLS-TE-STD-MIB :: mplsTunnelConfigured

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-TE-STD-MIBmplsTunnelConfigured

mplsTunnelConfigured

Module: MPLS-TE-STD-MIB

OID (symbolic): MPLS-TE-STD-MIB::mplsTunnelConfigured

OID (numeric): 1.3.6.1.2.1.10.166.3.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The number of tunnels configured on this device. A tunnel is considered configured if the mplsTunnelRowStatus is active(1).

What is mplsTunnelConfigured?

Reports the total number of MPLS traffic-engineering tunnels configured on this LSR, counting only rows where mplsTunnelRowStatus is active. An admin polls this scalar as a quick health check on tunnel provisioning without walking the full tunnel table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.3.1.1
snmpwalk -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelConfigured

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.3.1.1.1
snmpget -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelConfigured.1

Start monitoring Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-STD-MIB::mplsTunnelConfigured OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.166.3mplsTeStdMIBMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.1mplsTeScalarsMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.1.1mplsTunnelConfiguredMPLS-TE-STD-MIB