MPLS-TE-STD-MIB :: mplsTunnelCHopType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-TE-STD-MIBmplsTunnelCHopType

mplsTunnelCHopType

Module: MPLS-TE-STD-MIB

OID (symbolic): MPLS-TE-STD-MIB::mplsTunnelCHopType

OID (numeric): 1.3.6.1.2.1.10.166.3.2.8.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Denotes whether this is tunnel hop is routed in a strict or loose fashion.

What is mplsTunnelCHopType?

Reports whether this CSPF-computed hop is routed strictly or loosely. An admin compares this against the corresponding configured hop's type to confirm the CSPF engine honored the tunnel's strict/loose routing constraints.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.8.1.9
snmpwalk -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelCHopType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.8.1.9.1
snmpget -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelCHopType.1

Start monitoring Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-STD-MIB::mplsTunnelCHopType OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.166.3mplsTeStdMIBMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2mplsTeObjectsMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.8mplsTunnelCHopTableMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.8.1mplsTunnelCHopEntryMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.8.1.9mplsTunnelCHopTypeMPLS-TE-STD-MIB