MPLS-TE-STD-MIB :: mplsTunnelCHopIpPrefixLen

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-TE-STD-MIBmplsTunnelCHopIpPrefixLen

mplsTunnelCHopIpPrefixLen

Module: MPLS-TE-STD-MIB

OID (symbolic): MPLS-TE-STD-MIB::mplsTunnelCHopIpPrefixLen

OID (numeric): 1.3.6.1.2.1.10.166.3.2.8.1.5

Node type: OBJECT-TYPE

Type: InetAddressPrefixLength

Access: read-only

Description: If mplsTunnelCHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object mplsTunnelCHopIpAddr. Otherwise this value is irrelevant and should be ignored.

What is mplsTunnelCHopIpPrefixLen?

Reports the IP prefix length associated with mplsTunnelCHopIpAddr when the computed hop's address type is ipv4 or ipv6, otherwise ignored, defaulting to 32. An admin reads this alongside the computed hop address to fully interpret a CSPF-calculated network-level hop constraint.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.8.1.5
snmpwalk -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelCHopIpPrefixLen

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.8.1.5.1
snmpget -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelCHopIpPrefixLen.1

Start monitoring Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-STD-MIB::mplsTunnelCHopIpPrefixLen OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.166.3mplsTeStdMIBMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2mplsTeObjectsMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.8mplsTunnelCHopTableMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.8.1mplsTunnelCHopEntryMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.8.1.5mplsTunnelCHopIpPrefixLenMPLS-TE-STD-MIB