MPLS-TE-STD-MIB :: mplsTunnelCHopAddrType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-TE-STD-MIBmplsTunnelCHopAddrType

mplsTunnelCHopAddrType

Module: MPLS-TE-STD-MIB

OID (symbolic): MPLS-TE-STD-MIB::mplsTunnelCHopAddrType

OID (numeric): 1.3.6.1.2.1.10.166.3.2.8.1.3

Node type: OBJECT-TYPE

Type: TeHopAddressType

Access: read-only

Description: The Hop Address Type of this tunnel hop.

Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.

What is mplsTunnelCHopAddrType?

Reports the address type of this CSPF-computed hop, as calculated from the tunnel's explicit-route constraints; defaults to ipv4. An admin reads this read-only table to see what the constraint-based routing engine computed as the tunnel's path, distinct from the actual signaled route in mplsTunnelARHopTable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.8.1.3
snmpwalk -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelCHopAddrType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.8.1.3.1
snmpget -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelCHopAddrType.1

Start monitoring Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-STD-MIB::mplsTunnelCHopAddrType OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.166.3mplsTeStdMIBMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2mplsTeObjectsMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.8mplsTunnelCHopTableMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.8.1mplsTunnelCHopEntryMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.8.1.3mplsTunnelCHopAddrTypeMPLS-TE-STD-MIB