All MIBs › MPLS-TE-STD-MIB › mplsTunnelARHopLspId
mplsTunnelARHopLspId
Module: MPLS-TE-STD-MIB
OID (symbolic): MPLS-TE-STD-MIB::mplsTunnelARHopLspId
OID (numeric): 1.3.6.1.2.1.10.166.3.2.7.1.6
Node type: OBJECT-TYPE
Type: MplsLSPID
Access: read-only
Description: If mplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
What is mplsTunnelARHopLspId?
Reports the LSP ID of this hop when mplsTunnelARHopAddrType is lspid (meaning the tunnel is stacked inside another LSP via label stacking); otherwise 0. An admin reads this to identify a carrier LSP that the tunnel is tunneled through at this hop.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.7.1.6 snmpwalk -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelARHopLspId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.7.1.6.1 snmpget -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelARHopLspId.1
Start monitoring Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-STD-MIB::mplsTunnelARHopLspId OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.166 | mplsStdMIB | MPLS-TC-STD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.166.3 | mplsTeStdMIB | MPLS-TE-STD-MIB |
| 1.3.6.1.2.1.10.166.3.2 | mplsTeObjects | MPLS-TE-STD-MIB |
| 1.3.6.1.2.1.10.166.3.2.7 | mplsTunnelARHopTable | MPLS-TE-STD-MIB |
| 1.3.6.1.2.1.10.166.3.2.7.1 | mplsTunnelARHopEntry | MPLS-TE-STD-MIB |
| 1.3.6.1.2.1.10.166.3.2.7.1.6 | mplsTunnelARHopLspId | MPLS-TE-STD-MIB |