MPLS-TE-STD-MIB :: mplsTunnelARHopAddrType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-TE-STD-MIBmplsTunnelARHopAddrType

mplsTunnelARHopAddrType

Module: MPLS-TE-STD-MIB

OID (symbolic): MPLS-TE-STD-MIB::mplsTunnelARHopAddrType

OID (numeric): 1.3.6.1.2.1.10.166.3.2.7.1.3

Node type: OBJECT-TYPE

Type: TeHopAddressType

Access: read-only

Description: The Hop Address Type of this tunnel hop.

Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.

What is mplsTunnelARHopAddrType?

Reports the address type (ipv4, ipv6, asnumber, unnum, or lspid for CR-LDP tunnels) of this actual-route hop, as recorded by the signaling protocol; defaults to ipv4. An admin reads this to identify what kind of address describes a real hop the tunnel is currently traversing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.7.1.3
snmpwalk -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelARHopAddrType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.3.2.7.1.3.1
snmpget -v2c -c public <target> MPLS-TE-STD-MIB::mplsTunnelARHopAddrType.1

Start monitoring Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-STD-MIB::mplsTunnelARHopAddrType OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled core/edge router, Traffic Engineering) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.166.3mplsTeStdMIBMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2mplsTeObjectsMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.7mplsTunnelARHopTableMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.7.1mplsTunnelARHopEntryMPLS-TE-STD-MIB
1.3.6.1.2.1.10.166.3.2.7.1.3mplsTunnelARHopAddrTypeMPLS-TE-STD-MIB