MPLS-LSR-MIB :: mplsInterfaceTotalBandwidth

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-LSR-MIBmplsInterfaceTotalBandwidth

mplsInterfaceTotalBandwidth

Module: MPLS-LSR-MIB

OID (symbolic): MPLS-LSR-MIB::mplsInterfaceTotalBandwidth

OID (numeric): 1.3.6.1.3.96.1.1.1.6

Node type: OBJECT-TYPE

Type: MplsBitRate

Access: read-only

Description: This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable when applied to the interface with index 0.

What is mplsInterfaceTotalBandwidth?

This read-only value shows the total usable bandwidth available on an MPLS interface in kilobits per second. It defines the ceiling for LSP reservations. An operator checks this to verify interface capacity before reserving bandwidth for LSPs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.3.96.1.1.1.6
snmpwalk -v2c -c public <target> MPLS-LSR-MIB::mplsInterfaceTotalBandwidth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.3.96.1.1.1.6.1
snmpget -v2c -c public <target> MPLS-LSR-MIB::mplsInterfaceTotalBandwidth.1

Start monitoring Vendor-neutral IETF standard (MPLS Label Switching Router) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-LSR-MIB::mplsInterfaceTotalBandwidth OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS Label Switching Router) from a single console.

OID Breakdown

Upper-level ancestors (5 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.3experimentalAXON-MIB
Numeric OIDNameModule
1.3.6.1.3.96mplsLsrMIBMPLS-LSR-MIB
1.3.6.1.3.96.1mplsLsrObjectsMPLS-LSR-MIB
1.3.6.1.3.96.1.1mplsInterfaceConfTableMPLS-LSR-MIB
1.3.6.1.3.96.1.1.1mplsInterfaceConfEntryMPLS-LSR-MIB
1.3.6.1.3.96.1.1.1.6mplsInterfaceTotalBandwidthMPLS-LSR-MIB