All MIBs › MICOMFLTR
Category: Security
Description: Defines MICOM packet filter rules and access control list entries.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MICOMFLTR?
MICOMFLTR is a legacy Micom (built on MICOM-OSCAR-MIB) proprietary MIB configuring MAC/network filters for IPX and NVM (NetView?) traffic on router-attached areas (marked obsolete in the source file). Its MAC-filter table, keyed by system instance/ID, records status, source/destination address and mask, port, and direction; a network-filter table records net number, SAP type, net/SAP mask, port, and direction; and parallel NVM-prefixed tables mirror the same structure for NVM filtering. As a configuration MIB it lets an administrator confirm which MAC/network filters are applied per router area on this legacy Micom device. It is deployed on legacy Micom routing equipment (obsolete IPX/NVM filtering). Engineers can download the MICOMFLTR file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MICOMFLTR. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Legacy Micom routing equipment (obsolete IPX/NVM filtering)
Monitoring Examples
An administrator checks mcmipxMacFltrSrcAddress and mcmipxMacFltrDir to confirm a configured MAC filter's match criteria on this legacy Micom device.
What Can Be Monitored
- IPX/NVM MAC and network filter configuration
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mcmfilter | 1.3.6.1.4.1.335.1.4.12 | |||
| mcmipxMacFltrTable | 1.3.6.1.4.1.335.1.4.12.1 | not-accessible | NAME = ; DESC = ** OBSOLETE **; HELP = Information describing the configured \ parameters and cumulative statistics \ of the router's attached areas.; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmipxMacFltrEntry | 1.3.6.1.4.1.335.1.4.12.1.1 | not-accessible | NAME = ; DESC = ** OBSOLETE **; HELP = Information describing the configured \ parameters and cumulative statistics \ of one of the router's attached areas.; CAPABILITIES = ; | |
| INT mcmipxMacFltrSysInstance | 1.3.6.1.4.1.335.1.4.12.1.1.1 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE ** ; HELP = The unique identifier of the instance \ of IPX to which this row corresponds. \ This value may be written only when \ creating a new entry in the table.; CAPABILITIES = ; |
| INT mcmipxMacFltrId | 1.3.6.1.4.1.335.1.4.12.1.1.2 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The unique identifier of the IPX Mac \ Filter to which this row corresponds. \ This value may be written only when \ creating a new entry in the table.; CAPABILITIES = ; |
| INT mcmipxMacFltrStatus | 1.3.6.1.4.1.335.1.4.12.1.1.3 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The validity of this entry in the IPX \ Mac filter table. Setting this field \ to off indicates that this entry may \ be deleted from the system table at \ the implementator's discretion.; CAPABILITIES = ; |
| OCT mcmipxMacFltrSrcAddress | 1.3.6.1.4.1.335.1.4.12.1.1.4 | OCTET STRING | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The Physical address of the originating \ node.; CAPABILITIES = ; |
| OCT mcmipxMacFltrDstAddress | 1.3.6.1.4.1.335.1.4.12.1.1.5 | OCTET STRING | read-only | NAME = ; DESC = ; HELP = The Physical address of the destination \ node.; CAPABILITIES = ; |
| OCT mcmipxMacFltrSrcMask | 1.3.6.1.4.1.335.1.4.12.1.1.6 | OCTET STRING | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The mask for the Physical address of \ the originating node.; CAPABILITIES = ; |
| OCT mcmipxMacFltrDstMask | 1.3.6.1.4.1.335.1.4.12.1.1.7 | OCTET STRING | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The mask for the Physical address of \ the destination node.; CAPABILITIES = ; |
| INT mcmipxMacFltrPort | 1.3.6.1.4.1.335.1.4.12.1.1.8 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The IfIndex of the port whose traffic \ needs to be filtered as per this filter.; CAPABILITIES = ; |
| INT mcmipxMacFltrDir | 1.3.6.1.4.1.335.1.4.12.1.1.9 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The direction of traffic to which this \ filter need be applied.; CAPABILITIES = ; |
| mcmIpxNetFltrTable | 1.3.6.1.4.1.335.1.4.12.2 | not-accessible | NAME = ; DESC = ** OBSOLETE **; HELP = Information describing the configured \ parameters and cumulative statistics \ of the router's attached areas.; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmIpxNetFltrEntry | 1.3.6.1.4.1.335.1.4.12.2.1 | not-accessible | NAME = ; DESC = ** OBSOLETE **; HELP = Information describing the configured \ parameters and cumulative statistics \ of one of the router's attached areas.; CAPABILITIES = ; | |
| INT mcmIpxNetFltrSysInstance | 1.3.6.1.4.1.335.1.4.12.2.1.1 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The unique identifier of the instance \ of IPX to which this row corresponds. \ This value may be written only when \ creating a new entry in the table.; CAPABILITIES = ; |
| INT mcmipxNetFltrId | 1.3.6.1.4.1.335.1.4.12.2.1.2 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The unique identifier of the IPX Net \ Filter to which this row corresponds. \ This value may be written only when \ creating a new entry in the table.; CAPABILITIES = ; |
| INT mcmipxNetFltrStatus | 1.3.6.1.4.1.335.1.4.12.2.1.3 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The validity of this entry in the IPX \ Net filter table. Setting this field \ to off indicates that this entry may \ be deleted from the system table at \ the implementator's discretion.; CAPABILITIES = ; |
| NET mcmIpxNetFltrNetNumber | 1.3.6.1.4.1.335.1.4.12.2.1.4 | NetNumber | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The network portion of the IPX address.; CAPABILITIES = ; |
| SAP mcmipxNetFltrSapType | 1.3.6.1.4.1.335.1.4.12.2.1.5 | SapType | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The SAP of the packet.; CAPABILITIES = ; |
| NET mcmipxNetFltrNetMask | 1.3.6.1.4.1.335.1.4.12.2.1.6 | NetNumber | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The mask for the network portion of \ the IPX Address.; CAPABILITIES = ; |
| SAP mcmipxNetFltrSapMask | 1.3.6.1.4.1.335.1.4.12.2.1.7 | SapType | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The mask for the SAP.; CAPABILITIES = ; |
| INT mcmIpxNetFltrPort | 1.3.6.1.4.1.335.1.4.12.2.1.8 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The IfIndex of the port whose traffic \ needs to be filtered as per this filter.; CAPABILITIES = ; |
| INT mcmIpxNetFltrDir | 1.3.6.1.4.1.335.1.4.12.2.1.9 | INTEGER | read-only | NAME = ; DESC = ** OBSOLETE **; HELP = The direction of traffic to which this \ filter need be applied.; CAPABILITIES = ; |
| nvmipxMacFltrTable | 1.3.6.1.4.1.335.1.4.12.3 | not-accessible | NAME = ; DESC = ** OBSOLETE **; HELP = Information describing the configured \ parameters and cumulative statistics \ of the router's attached areas.; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmipxMacFltrEntry | 1.3.6.1.4.1.335.1.4.12.3.1 | not-accessible | NAME = ; DESC = ** OBSOLETE **; HELP = Information describing the configured \ parameters and cumulative statistics \ of one of the router's attached areas.; CAPABILITIES = ; | |
| INT nvmipxMacFltrSysInstance | 1.3.6.1.4.1.335.1.4.12.3.1.1 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The unique identifier of the instance \ of IPX to which this row corresponds. \ This value may be written only when \ creating a new entry in the table.; CAPABILITIES = ; |
| INT nvmipxMacFltrId | 1.3.6.1.4.1.335.1.4.12.3.1.2 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The unique identifier of the IPX Mac \ Filter to which this row corresponds. \ This value may be written only when \ creating a new entry in the table.; CAPABILITIES = ; |
| INT nvmipxMacFltrStatus | 1.3.6.1.4.1.335.1.4.12.3.1.3 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The validity of this entry in the IPX \ Mac filter table. Setting this field \ to off indicates that this entry may \ be deleted from the system table at \ the implementator's discretion.; CAPABILITIES = ; |
| OCT nvmipxMacFltrSrcAddress | 1.3.6.1.4.1.335.1.4.12.3.1.4 | OCTET STRING | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The Physical address of the originating \ node.; CAPABILITIES = ; |
| OCT nvmipxMacFltrDstAddress | 1.3.6.1.4.1.335.1.4.12.3.1.5 | OCTET STRING | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The Physical address of the destination \ node.; CAPABILITIES = ; |
| OCT nvmipxMacFltrSrcMask | 1.3.6.1.4.1.335.1.4.12.3.1.6 | OCTET STRING | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The mask for the Physical address of \ the originating node.; CAPABILITIES = ; |
| OCT nvmipxMacFltrDstMask | 1.3.6.1.4.1.335.1.4.12.3.1.7 | OCTET STRING | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The mask for the Physical address of \ the destination node.; CAPABILITIES = ; |
| INT nvmipxMacFltrPort | 1.3.6.1.4.1.335.1.4.12.3.1.8 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The IfIndex of the port whose traffic \ needs to be filtered as per this filter.; CAPABILITIES = ; |
| INT nvmipxMacFltrDir | 1.3.6.1.4.1.335.1.4.12.3.1.9 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The direction of traffic to which this \ filter need be applied.; CAPABILITIES = ; |
| nvmIpxNetFltrTable | 1.3.6.1.4.1.335.1.4.12.4 | not-accessible | NAME = ; DESC = ** OBSOLETE **; HELP = Information describing the configured \ parameters and cumulative statistics \ of the router's attached areas.; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmIpxNetFltrEntry | 1.3.6.1.4.1.335.1.4.12.4.1 | not-accessible | NAME = ; DESC = ** OBSOLETE **; HELP = Information describing the configured \ parameters and cumulative statistics \ of one of the router's attached areas.; CAPABILITIES = ; | |
| INT nvmIpxNetFltrSysInstance | 1.3.6.1.4.1.335.1.4.12.4.1.1 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The unique identifier of the instance \ of IPX to which this row corresponds. \ This value may be written only when \ creating a new entry in the table.; CAPABILITIES = ; |
| INT nvmipxNetFltrId | 1.3.6.1.4.1.335.1.4.12.4.1.2 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The unique identifier of the IPX Net \ Filter to which this row corresponds. \ This value may be written only when \ creating a new entry in the table.; CAPABILITIES = ; |
| INT nvmipxNetFltrStatus | 1.3.6.1.4.1.335.1.4.12.4.1.3 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The validity of this entry in the IPX \ Net filter table. Setting this field \ to off indicates that this entry may \ be deleted from the system table at \ the implementator's discretion.; CAPABILITIES = ; |
| NET nvmIpxNetFltrNetNumber | 1.3.6.1.4.1.335.1.4.12.4.1.4 | NetNumber | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The network portion of the IPX address.; CAPABILITIES = ; |
| SAP nvmipxNetFltrSapType | 1.3.6.1.4.1.335.1.4.12.4.1.5 | SapType | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The SAP of the packet.; CAPABILITIES = ; |
| NET nvmipxNetFltrNetMask | 1.3.6.1.4.1.335.1.4.12.4.1.6 | NetNumber | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The mask for the network portion of \ the IPX Address.; CAPABILITIES = ; |
| SAP nvmipxNetFltrSapMask | 1.3.6.1.4.1.335.1.4.12.4.1.7 | SapType | read-write | NAME = ; DESC = ;** OBSOLETE ** HELP = The mask for the SAP.; CAPABILITIES = ; |
| INT nvmIpxNetFltrPort | 1.3.6.1.4.1.335.1.4.12.4.1.8 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The IfIndex of the port whose traffic \ needs to be filtered as per this filter.; CAPABILITIES = ; |
| INT nvmIpxNetFltrDir | 1.3.6.1.4.1.335.1.4.12.4.1.9 | INTEGER | read-write | NAME = ; DESC = ** OBSOLETE **; HELP = The direction of traffic to which this \ filter need be applied.; CAPABILITIES = ; |
| mcmIpRipInFltrTable | 1.3.6.1.4.1.335.1.4.12.5 | not-accessible | NAME = ; DESC = Information about RIP Incoming Network \ filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| mcmIpRipInFltrEntry | 1.3.6.1.4.1.335.1.4.12.5.1 | not-accessible | NAME = ; DESC = RIP Incoming Network Filter entry; HELP = ; CAPABILITIES = ; | |
| IP mcmIpRipInFltrMask | 1.3.6.1.4.1.335.1.4.12.5.1.1 | IpAddress | read-only | NAME = ; DESC = The network mask associated with the \ filter entry. This is to provide \ network range for a match; HELP = ; CAPABILITIES = ; |
| IP mcmIpRipInFltrAddr | 1.3.6.1.4.1.335.1.4.12.5.1.2 | IpAddress | read-only | NAME = ; DESC = The network associated with the \ filter entry.; HELP = Routes in the incoming RIP advertisements \ which match the specific address wil be \ filtered; CAPABILITIES = ; |
| INT mcmIpRipInFltrAction | 1.3.6.1.4.1.335.1.4.12.5.1.3 | INTEGER | read-only | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| mcmIpRipOutFltrTable | 1.3.6.1.4.1.335.1.4.12.6 | not-accessible | NAME = ; DESC = Information about the RIP Outgoing \ Network filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| mcmIpRipOutFltrEntry | 1.3.6.1.4.1.335.1.4.12.6.1 | not-accessible | NAME = ; DESC = RIP Outgoing Network filter entry; HELP = ; CAPABILITIES = ; | |
| IP mcmIpRipOutFltrMask | 1.3.6.1.4.1.335.1.4.12.6.1.1 | IpAddress | read-only | NAME = ; DESC = The network mask associated with \ the filter entry. This is to provide \ network range for a match. ; HELP = ; CAPABILITIES = ; |
| IP mcmIpRipOutFltrAddr | 1.3.6.1.4.1.335.1.4.12.6.1.2 | IpAddress | read-only | NAME = ; DESC = The network associated with the filter \ entry.; HELP = Routes in the outgoing RIP advrtisement \ with this address will be filtered; CAPABILITIES = ; |
| INT mcmIpRipOutFltrAction | 1.3.6.1.4.1.335.1.4.12.6.1.3 | INTEGER | read-only | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| mcmIpRipGwyFltrTable | 1.3.6.1.4.1.335.1.4.12.7 | not-accessible | NAME = ; DESC = Information about the RIP Gateway \ filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| mcmIpRipGwyFltrEntry | 1.3.6.1.4.1.335.1.4.12.7.1 | not-accessible | NAME = ; DESC = RIP Gateway filter entry; HELP = ; CAPABILITIES = ; | |
| IP mcmIpRipGwyFltrMask | 1.3.6.1.4.1.335.1.4.12.7.1.1 | IpAddress | read-only | NAME = ; DESC = The gateway mask associated with the \ filter entry. This is to provide a \ gateway range for a match.; HELP = ; CAPABILITIES = ; |
| IP mcmIpRipGwyFltrAddr | 1.3.6.1.4.1.335.1.4.12.7.1.2 | IpAddress | read-only | NAME = ; DESC = The gateway associated with the \ filter entry.; HELP = RIP advertisements from gateway(s) \ specified will be filtered.; CAPABILITIES = ; |
| INT mcmIpRipGwyFltrAction | 1.3.6.1.4.1.335.1.4.12.7.1.3 | INTEGER | read-only | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| mcmIpOspfOutFltrTable | 1.3.6.1.4.1.335.1.4.12.8 | not-accessible | NAME = ; DESC = Information about the OSPF outgoing \ filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| mcmIpOspfOutFltrEntry | 1.3.6.1.4.1.335.1.4.12.8.1 | not-accessible | NAME = ; DESC = OSPF Outgoing filter entry; HELP = ; CAPABILITIES = ; | |
| IP mcmIpOspfOutFltrMask | 1.3.6.1.4.1.335.1.4.12.8.1.1 | IpAddress | read-only | NAME = ; DESC = The network mask associated with the \ filter entry. This is to provide a \ network range for a match.; HELP = ; CAPABILITIES = ; |
| IP mcmIpOspfOutFltrAddr | 1.3.6.1.4.1.335.1.4.12.8.1.2 | IpAddress | read-only | NAME = ; DESC = The network associated with the \ filter entry. Routing entry in the \ OSPF AS_EXTERN advertisement \ with this address will be filtered; HELP = ; CAPABILITIES = ; |
| INT mcmIpOspfOutFltrAction | 1.3.6.1.4.1.335.1.4.12.8.1.3 | INTEGER | read-only | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| mcmIpFwdPortInFltrTable | 1.3.6.1.4.1.335.1.4.12.9 | not-accessible | NAME = ; DESC = Information about the IP Forwarding \ Incoming Port filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| mcmIpFwdPortInFltrEntry | 1.3.6.1.4.1.335.1.4.12.9.1 | not-accessible | NAME = ; DESC = IP forwarding port incoming filter entry; HELP = ; CAPABILITIES = ; | |
| INT mcmIpFwdPortInFltrPortNo | 1.3.6.1.4.1.335.1.4.12.9.1.1 | INTEGER | read-only | NAME = ; DESC = The output interface/port associated \ with this filter entry. This filter \ HELP = This filter entry is applied to IP packets \ received in this interface/port only.; CAPABILITIES = ; |
| IP mcmIpFwdPortInFltrMask | 1.3.6.1.4.1.335.1.4.12.9.1.2 | IpAddress | read-only | NAME = ; DESC = The source/destination address mask \ associated with the filter entry.; HELP = This is to provide IP address \ range for a match. Depending on \ mcmIpFwdPortOutFltrSrcDst either the \ source or destination address in the \ IP packet is compared for a match.; CAPABILITIES = ; |
| IP mcmIpFwdPortInFltrAddr | 1.3.6.1.4.1.335.1.4.12.9.1.3 | IpAddress | read-only | NAME = ; DESC = The source/destination address associated \ with the filter entry.; HELP = Depending on mcmIpFwdPortOutFltrSrcDst, \ either the source or destination address \ in the IP packet is compared for a match. \ If the respective address in the IP \ packet matches this together with other \ patterns in the filter entry then the IP \ packet is filtered; CAPABILITIES = ; |
| INT mcmIpFwdPortInFltrProtId | 1.3.6.1.4.1.335.1.4.12.9.1.4 | INTEGER | read-only | NAME = ; DESC = The protocol type associated with the \ filter entry.; HELP = If the protocol type in the IP packet \ matches this together with other patterns \ together with other patterns in the filter \ entry then the IP packet is filtered; CAPABILITIES = ; |
| INT mcmIpFwdPortInFltrPortId | 1.3.6.1.4.1.335.1.4.12.9.1.5 | INTEGER | read-only | NAME = ; DESC = The TCP/UDP port number associated with the \ filter entry.; HELP = If the destination TCP/UDP port number in the \ IP packet matches this together with other patterns \ in the filter entry then the IP pkt is filtered.; the IP packet is filtered; CAPABILITIES = ; |
| INT mcmIpFwdPortInFltrSrcDst | 1.3.6.1.4.1.335.1.4.12.9.1.6 | INTEGER | read-only | NAME = ; DESC = Source or destination IP address in the \ IP packet to be compared for filter \ matching; HELP = ; CAPABILITIES = ; |
| INT mcmIpFwdPortInFltrAction | 1.3.6.1.4.1.335.1.4.12.9.1.7 | INTEGER | read-only | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| mcmIpFwdPortOutFltrTable | 1.3.6.1.4.1.335.1.4.12.10 | not-accessible | NAME = ; DESC = Information about the IP Forwarding Outgoing \ Port filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| mcmIpFwdPortOutFltrEntry | 1.3.6.1.4.1.335.1.4.12.10.1 | not-accessible | NAME = ; DESC = IP forwarding port outgoing filter entry; HELP = ; CAPABILITIES = ; | |
| INT mcmIpFwdPortOutFltrPortNo | 1.3.6.1.4.1.335.1.4.12.10.1.1 | INTEGER | read-only | NAME = ; DESC = The output interface/port associated \ with this filter entry.; HELP = This filter entry is applied to IP packets \ forwarded on this interface/port only,; CAPABILITIES = ; |
| IP mcmIpFwdPortOutFltrMask | 1.3.6.1.4.1.335.1.4.12.10.1.2 | IpAddress | read-only | NAME = ; DESC =The source/destination address mask associated \ with the filter entry. This is to provide \ IP address range for a match.; HELP = Depending on mcmIpFwdPortOutFltrSrcDst either \ the source or Dest. address in the IP packet is \ compared for a match.; CAPABILITIES = ; |
| IP mcmIpFwdPortOutFltrAddr | 1.3.6.1.4.1.335.1.4.12.10.1.3 | IpAddress | read-only | NAME = ; DESC = The source/dest. addr associated with the filter entry.\ Depending on mcmIpFwdPortOutFltrSrcDst, the Src or Dest \ address in the IP packet is compared for a match. HELP = If the respective address in the IP packet matches this \ together with other patterns in the filter \ entry then IP packet is filtered; CAPABILITIES = ; |
| INT mcmIpFwdPortOutFltrProtId | 1.3.6.1.4.1.335.1.4.12.10.1.4 | INTEGER | read-only | NAME = ; DESC = The protocol type associated with the \ filter entry.; HELP = If the protocol type in the IP packet matches \ this together with other patterns in the filter \ entry then the IP packet is filtered.; packet is filtered; CAPABILITIES = ; |
| INT mcmIpFwdPortOutFltrPortId | 1.3.6.1.4.1.335.1.4.12.10.1.5 | INTEGER | read-only | NAME = ; DESC = The TCP/UDP port number associated with the \ filter entry.; HELP = If the destination TCP/UDP port number in the \ IP packet matches this together w/ other patterns \ in the filter entry then the IP pkt is filtered.; CAPABILITIES = ; |
| INT mcmIpFwdPortOutFltrSrcDst | 1.3.6.1.4.1.335.1.4.12.10.1.6 | INTEGER | read-only | NAME = ; DESC = Source or deatination IP address in the \ IP packet to be compared for filter \ matching; HELP = ; CAPABILITIES = ; |
| INT mcmIpFwdPortOutFltrAction | 1.3.6.1.4.1.335.1.4.12.10.1.7 | INTEGER | read-only | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| mcmIpSysFltrTable | 1.3.6.1.4.1.335.1.4.12.11 | not-accessible | NAME = ; DESC = Information about the IP forwarding system \ filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| mcmIpSysFltrEntry | 1.3.6.1.4.1.335.1.4.12.11.1 | not-accessible | NAME = ; DESC = IP forwarding system filter entry; HELP = ; CAPABILITIES = ; | |
| IP mcmIpSysFltrDstMask | 1.3.6.1.4.1.335.1.4.12.11.1.1 | IpAddress | read-only | NAME = ; DESC = The destination address mask associated \ with the filter entry. This is to \ provide IP address range for a match; HELP = ; CAPABILITIES = ; |
| IP mcmIpSysFltrDstAddr | 1.3.6.1.4.1.335.1.4.12.11.1.2 | IpAddress | read-only | NAME = ; DESC = The destination address associated \ with the filter entry.; HELP = If the destination address in the IP packect \ matches this together with other \ patterns in the filter entry then IP packet \ is filtered; CAPABILITIES = ; |
| IP mcmIpSysFltrSrcMask | 1.3.6.1.4.1.335.1.4.12.11.1.3 | IpAddress | read-only | NAME = ; DESC = The source address mask associated with the \ filter entry. This is to provide IP address \ range for a match; HELP = ; CAPABILITIES = ; |
| IP mcmIpSysFltrSrcAddr | 1.3.6.1.4.1.335.1.4.12.11.1.4 | IpAddress | read-only | NAME = ; DESC = The source address associated with the \ filter entry.; HELP = If the source address in the IP packet \ matches this together with other patterns \ in the filter entry then IP packet is filtered.; CAPABILITIES = ; |
| INT mcmIpSysFltrProtId | 1.3.6.1.4.1.335.1.4.12.11.1.5 | INTEGER | read-only | NAME = ; DESC = The protocol type associated with the \ filter entry.; HELP = If the protocol type in the IP packet \ matches this together w/ other patterns \ in the filter entry then the IP pkt is filtered.; CAPABILITIES = ; |
| INT mcmIpSysFltrPortId | 1.3.6.1.4.1.335.1.4.12.11.1.6 | INTEGER | read-only | NAME = ; DESC = The TCP/UDP port number associated with \ the filter entry.; HELP = If the destination TCP/UDP port number in the \ IP packet matches this together w/other patterns \ in the filter entry then the IP packet is filtered; CAPABILITIES = ; |
| INT mcmIpSysFltrAction | 1.3.6.1.4.1.335.1.4.12.11.1.7 | INTEGER | read-only | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| nvmIpRipInFltrTable | 1.3.6.1.4.1.335.1.4.12.12 | not-accessible | NAME = ; DESC = Information about RIP Incoming Network \ filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| nvmIpRipInFltrEntry | 1.3.6.1.4.1.335.1.4.12.12.1 | not-accessible | NAME = ; DESC = RIP Incoming Network Filter entry; HELP = ; CAPABILITIES = ; | |
| IP nvmIpRipInFltrMask | 1.3.6.1.4.1.335.1.4.12.12.1.1 | IpAddress | read-write | NAME = ; DESC = The network mask associated with the \ filter entry. This is to provide \ network range for a match; HELP = ; CAPABILITIES = ; |
| IP nvmIpRipInFltrAddr | 1.3.6.1.4.1.335.1.4.12.12.1.2 | IpAddress | read-write | NAME = ; DESC = The network associated with the filter entry.\ Routes in the incoming RIP advertisements \ which match the specific address will be \ filtered; HELP = ; CAPABILITIES = ; |
| INT nvmIpRipInFltrAction | 1.3.6.1.4.1.335.1.4.12.12.1.3 | INTEGER | read-write | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| nvmIpRipOutFltrTable | 1.3.6.1.4.1.335.1.4.12.13 | not-accessible | NAME = ; DESC = Information about the RIP Outgoing Network \ filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| nvmIpRipOutFltrEntry | 1.3.6.1.4.1.335.1.4.12.13.1 | not-accessible | NAME = ; DESC = RIP Outgoing Network filter entry; HELP = ; CAPABILITIES = ; | |
| IP nvmIpRipOutFltrMask | 1.3.6.1.4.1.335.1.4.12.13.1.1 | IpAddress | read-write | NAME = ; DESC = The network mask associated with the \ filter entry. This is to provide \ network range for a match. ; HELP = ; CAPABILITIES = ; |
| IP nvmIpRipOutFltrAddr | 1.3.6.1.4.1.335.1.4.12.13.1.2 | IpAddress | read-write | NAME = ; DESC = The network associated with the \ filter entry. Routes in the outgoing RIP \ advertisement with this addr w/be filtered.; HELP = ; CAPABILITIES = ; |
| INT nvmIpRipOutFltrAction | 1.3.6.1.4.1.335.1.4.12.13.1.3 | INTEGER | read-write | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| nvmIpRipGwyFltrTable | 1.3.6.1.4.1.335.1.4.12.14 | not-accessible | NAME = ; DESC = Information about the RIP Gateway \ filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| nvmIpRipGwyFltrEntry | 1.3.6.1.4.1.335.1.4.12.14.1 | not-accessible | NAME = ; DESC = RIP Gateway filter entry; HELP = ; CAPABILITIES = ; | |
| IP nvmIpRipGwyFltrMask | 1.3.6.1.4.1.335.1.4.12.14.1.1 | IpAddress | read-write | NAME = ; DESC = The gateway mask associated with the \ filter entry. This is to provide a \ gateway range for a match.; HELP = ; CAPABILITIES = ; |
| IP nvmIpRipGwyFltrAddr | 1.3.6.1.4.1.335.1.4.12.14.1.2 | IpAddress | read-write | NAME = ; DESC = The gateway associated with the \ filter entry.; HELP = RIP advertisements from gateway(s) \ specified will be filtered.; CAPABILITIES = ; |
| INT nvmIpRipGwyFltrAction | 1.3.6.1.4.1.335.1.4.12.14.1.3 | INTEGER | read-write | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| nvmIpOspfOutFltrTable | 1.3.6.1.4.1.335.1.4.12.15 | not-accessible | NAME = ; DESC = Information about the OSPF outgoing \ filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| nvmIpOspfOutFltrEntry | 1.3.6.1.4.1.335.1.4.12.15.1 | not-accessible | NAME = ; DESC = OSPF Outgoing filter entry; HELP = ; CAPABILITIES = ; | |
| IP nvmIpOspfOutFltrMask | 1.3.6.1.4.1.335.1.4.12.15.1.1 | IpAddress | read-write | NAME = ; DESC = The network mask associated with the \ filter entry. This is to provide a \ network range for a match.; HELP = ; CAPABILITIES = ; |
| IP nvmIpOspfOutFltrAddr | 1.3.6.1.4.1.335.1.4.12.15.1.2 | IpAddress | read-write | NAME = ; DESC = The network associated with the \ filter entry. Routing entry in the \ OSPF AS_EXTERN advertisement \ with this address will be filtered; HELP = ; CAPABILITIES = ; |
| INT nvmIpOspfOutFltrAction | 1.3.6.1.4.1.335.1.4.12.15.1.3 | INTEGER | read-write | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| nvmIpFwdPortInFltrTable | 1.3.6.1.4.1.335.1.4.12.16 | not-accessible | NAME = ; DESC = Information about the IP Forwarding \ Incoming Port filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| nvmIpFwdPortInFltrEntry | 1.3.6.1.4.1.335.1.4.12.16.1 | not-accessible | NAME = ; DESC = IP forwarding port incoming filter entry; HELP = ; CAPABILITIES = ; | |
| INT nvmIpFwdPortInFltrPortNo | 1.3.6.1.4.1.335.1.4.12.16.1.1 | INTEGER | read-write | NAME = ; DESC = The output interface/port associated \ with this filter entry. This filter \ HELP = This filter entry is applied to IP packets \ received in this interface/port only.; CAPABILITIES = ; |
| IP nvmIpFwdPortInFltrMask | 1.3.6.1.4.1.335.1.4.12.16.1.2 | IpAddress | read-write | NAME = ; DESC = The source/destination address mask \ associated with the filter entry.; HELP = This is to provide IP address \ range for a match. Depending on \ mcmIpFwdPortOutFltrSrcDst either the \ source or destination address in the \ IP packet is compared for a match.; CAPABILITIES = ; |
| IP nvmIpFwdPortInFltrAddr | 1.3.6.1.4.1.335.1.4.12.16.1.3 | IpAddress | read-write | NAME = ; DESC = The source/destination address associated \ with the filter entry. Depending on.; HELP = Depending on mcmIpFwdPortOutFltrSrcDst, \ either the source or destination address \ in the IP packet is compared for a match. \ If the respective address in the IP \ packet matches this together with other \ patterns in the filter entry then the IP \ packet is filtered; CAPABILITIES = ; |
| INT nvmIpFwdPortInFltrProtId | 1.3.6.1.4.1.335.1.4.12.16.1.4 | INTEGER | read-write | NAME = ; DESC = The protocol type associated with the \ filter entry.; HELP = If the protocol type in the IP packet \ matches this together with other patterns \ together with other patterns in the filter \ entry then the IP packet is filtered; CAPABILITIES = ; |
| INT nvmIpFwdPortInFltrPortId | 1.3.6.1.4.1.335.1.4.12.16.1.5 | INTEGER | read-write | NAME = ; DESC = The TCP/UDP port number associated with the \ filter entry.; HELP = If the destination TCP/UDP port number in the \ IP packet matches this together with other patterns \ in the filter entry then the IP pkt is filtered.; the IP packet is filtered; CAPABILITIES = ; |
| INT nvmIpFwdPortInFltrSrcDst | 1.3.6.1.4.1.335.1.4.12.16.1.6 | INTEGER | read-write | NAME = ; DESC = Source or destination IP address in the \ IP packet to be compared for filter \ matching; HELP = ; CAPABILITIES = ; |
| INT nvmIpFwdPortInFltrAction | 1.3.6.1.4.1.335.1.4.12.16.1.7 | INTEGER | read-write | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| nvmIpFwdPortOutFltrTable | 1.3.6.1.4.1.335.1.4.12.17 | not-accessible | NAME = ; DESC = Information about the IP Forwarding \ Outgoing Port filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| nvmIpFwdPortOutFltrEntry | 1.3.6.1.4.1.335.1.4.12.17.1 | not-accessible | NAME = ; DESC = IP forwarding port outgoing filter entry; HELP = ; CAPABILITIES = ; | |
| INT nvmIpFwdPortOutFltrPortNo | 1.3.6.1.4.1.335.1.4.12.17.1.1 | INTEGER | read-write | NAME = ; DESC = The output interface/port associated \ with this filter entry.; HELP = This filter entry is applied to IP packets \ forwarded on this interface/port only,; CAPABILITIES = ; |
| IP nvmIpFwdPortOutFltrMask | 1.3.6.1.4.1.335.1.4.12.17.1.2 | IpAddress | read-write | NAME = ; DESC = The source/destination address mask associated \ with the filter entry. This is to provide \ IP address range for a match.; HELP = Depending on mcmIpFwdPortOutFltrSrcDst either \ the source or Dest. address in the IP packet is \ compared for a match.; CAPABILITIES = ; |
| IP nvmIpFwdPortOutFltrAddr | 1.3.6.1.4.1.335.1.4.12.17.1.3 | IpAddress | read-write | NAME = ; DESC = The source/dest. addr associated with the filter entry.\ Depending on mcmIpFwdPortOutFltrSrcDst, the Src or Dest \ address in the IP packet is compared for a match. HELP = If the respective address in the IP packet matches this \ together with other patterns in the filter \ entry then IP packet is filtered; CAPABILITIES = ; |
| INT nvmIpFwdPortOutFltrProtId | 1.3.6.1.4.1.335.1.4.12.17.1.4 | INTEGER | read-write | NAME = ; DESC = The protocol type associated with the \ filter entry.; HELP = If the protocol type in the IP packet matches \ this together with other patterns in the filter \ entry then the IP packet is filtered.; packet is filtered; CAPABILITIES = ; |
| INT nvmIpFwdPortOutFltrPortId | 1.3.6.1.4.1.335.1.4.12.17.1.5 | INTEGER | read-write | NAME = ; DESC = The TCP/UDP port number associated with the \ filter entry.; HELP = If the destination TCP/UDP port number in the \ IP packet matches this together w/ other patterns \ in the filter entry then the IP pkt is filtered.; CAPABILITIES = ; |
| INT nvmIpFwdPortOutFltrSrcDst | 1.3.6.1.4.1.335.1.4.12.17.1.6 | INTEGER | read-write | NAME = ; DESC = Source or deatination IP address in the IP \ packet to be compared for filter matching; HELP = ; CAPABILITIES = ; |
| INT nvmIpFwdPortOutFltrAction | 1.3.6.1.4.1.335.1.4.12.17.1.7 | INTEGER | read-write | NAME = ; DESC = Action to be taken (FORWARD/DISCARD) \ in case of a match; HELP = ; CAPABILITIES = ; |
| nvmIpSysFltrTable | 1.3.6.1.4.1.335.1.4.12.18 | not-accessible | NAME = ; DESC = Information about the IP forwarding \ system filter entry; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE; | |
| nvmIpSysFltrEntry | 1.3.6.1.4.1.335.1.4.12.18.1 | not-accessible | NAME = ; DEST = IP forwarding system filter entry; HELP = ; CAPABILITIES = ; | |
| IP nvmIpSysFltrDstMask | 1.3.6.1.4.1.335.1.4.12.18.1.1 | IpAddress | read-write | NAME = ; DEST = The destination address mask associated \ with the filter entry. This is to provide \ IP address range for a match; HELP = ; CAPABILITIES = ; |
| IP nvmIpSysFltrDstAddr | 1.3.6.1.4.1.335.1.4.12.18.1.2 | IpAddress | read-write | NAME = ; DESC = The destination address associated \ with the filter entry.; HELP = If the destination address in the IP packect \ matches this together with other \ patterns in the filter entry then IP packet \ is filtered; CAPABILITIES = ; |
| IP nvmIpSysFltrSrcMask | 1.3.6.1.4.1.335.1.4.12.18.1.3 | IpAddress | read-write | NAME = ; DESC = The source address mask associated \ with the filter entry. This is to \ provide IP address range for a match; HELP = ; CAPABILITIES = ; |
| IP nvmIpSysFltrSrcAddr | 1.3.6.1.4.1.335.1.4.12.18.1.4 | IpAddress | read-write | NAME = ; DESC = The source address associated with the \ filter entry.; HELP = If the source address in the IP packet \ matches this together with other patterns \ in the filter entry then IP packet is filtered.; CAPABILITIES = ; |
| INT nvmIpSysFltrProtId | 1.3.6.1.4.1.335.1.4.12.18.1.5 | INTEGER | read-write | NAME = ; DESC = The protocol type associated with the \ filter entry.; HELP = If the protocol type in the IP packet \ matches this together w/ other patterns \ in the filter entry then the IP pkt is filtered.; CAPABILITIES = ; |
| INT nvmIpSysFltrPortId | 1.3.6.1.4.1.335.1.4.12.18.1.6 | INTEGER | read-write | NAME = ; DESC = The TCP/UDP port number associated with \ the filter entry.; HELP = If the destination TCP/UDP port number in the \ IP packet matches this together w/other patterns \ in the filter entry then the IP packet is filtered; CAPABILITIES = ; |
| INT nvmIpSysFltrAction | 1.3.6.1.4.1.335.1.4.12.18.1.7 | INTEGER | read-write | NAME = ; DESC = ; HELP = Action to be taken (FORWARD/DISCARD) \ in case of a match; CAPABILITIES = ; |
| mcmipxSysFilterGroup | 1.3.6.1.4.1.335.1.4.12.19 | |||
| INT mcmipxSysRipFilter | 1.3.6.1.4.1.335.1.4.12.19.1 | INTEGER | read-only | NAME = ; DESC = Indicates whether the ipx rip filter \ is inclusive or exclusive; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT mcmipxSysSapFilter | 1.3.6.1.4.1.335.1.4.12.19.2 | INTEGER | read-only | NAME = ; DESC = Indicates whether the ipx sap filter \ is inclusive or exclusive; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT mcmipxSysNetFilter | 1.3.6.1.4.1.335.1.4.12.19.3 | INTEGER | read-only | NAME = ; DESC = Indicates whether the ipx net filter \ is inclusive or exclusive; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| nvmipxSysFilterGroup | 1.3.6.1.4.1.335.1.4.12.20 | |||
| INT nvmipxSysRipFilter | 1.3.6.1.4.1.335.1.4.12.20.1 | INTEGER | read-write | NAME = ; DESC = Indicates whether the ipx rip filter \ is inclusive or exclusive; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT nvmipxSysSapFilter | 1.3.6.1.4.1.335.1.4.12.20.2 | INTEGER | read-write | NAME = ; DESC = Indicates whether the ipx sap filter \ is inclusive or exclusive; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT nvmipxSysNetFilter | 1.3.6.1.4.1.335.1.4.12.20.3 | INTEGER | read-write | NAME = ; DESC = Indicates whether the ipx net filter \ is inclusive or exclusive; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| mcmIpxRipFltrTable | 1.3.6.1.4.1.335.1.4.12.21 | not-accessible | NAME = ; DESC = Information describing the configured \ parameters and cumulative statistics \ of the router's attached areas.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmIpxRipFltrEntry | 1.3.6.1.4.1.335.1.4.12.21.1 | not-accessible | NAME = ; DESC = Indicates an entry in the Rip Fltr \ table. HELP = ; CAPABILITIES = ; | |
| INT mcmIpxRipFltrSysInstance | 1.3.6.1.4.1.335.1.4.12.21.1.1 | INTEGER | read-only | NAME = ; DESC = The unique identifier of the instance \ of the IPX to which this row corresponds.; HELP = ; CAPABILITIES = ; |
| NET mcmIpxRipFltrNetNumber | 1.3.6.1.4.1.335.1.4.12.21.1.2 | NetNumber | read-only | NAME = ; DESC = The network portion of the IPX address; HELP = ; CAPABILITIES = ; |
| INT mcmIpxRipFltrPort | 1.3.6.1.4.1.335.1.4.12.21.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates \ whether the filtering is applied on \ the WAN ports or the ethernet ports.; HELP = ; CAPABILITIES = ; |
| mcmIpxSapFltrTable | 1.3.6.1.4.1.335.1.4.12.22 | not-accessible | NAME = ; DESC = Information describing the configured \ parameters and cumulative statistics \ of the router's attached areas.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmIpxSapFltrEntry | 1.3.6.1.4.1.335.1.4.12.22.1 | not-accessible | NAME = ; DESC = Indicates an entry in the Sap Filter \ table. HELP = ; CAPABILITIES = ; | |
| INT mcmIpxSapFltrSysInstance | 1.3.6.1.4.1.335.1.4.12.22.1.1 | INTEGER | read-only | NAME = ; DESC = The unique identifier of the instance \ of the IPX to which this row corresponds.; HELP = ; CAPABILITIES = ; |
| SAP mcmIpxSapFltrSapType | 1.3.6.1.4.1.335.1.4.12.22.1.2 | SapType | read-only | NAME = ; DESC = The SAP of the packet; HELP = ; CAPABILITIES = ; |
| INT mcmIpxSapFltrPort | 1.3.6.1.4.1.335.1.4.12.22.1.3 | INTEGER | read-only | NAME = ; DESC = The value of this object indicates \ whether the filtering is applied on \ the WAN ports or the ethernet ports.; HELP = ; CAPABILITIES = ; |
| nvmIpxRipFltrTable | 1.3.6.1.4.1.335.1.4.12.24 | not-accessible | NAME = ; DESC = Information describing the configured \ parameters and cumulative statistics \ of the router's attached areas.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmIpxRipFltrEntry | 1.3.6.1.4.1.335.1.4.12.24.1 | not-accessible | NAME = ; DESC = Indicates an entry in the Rip Fltr \ table. HELP = ; CAPABILITIES = ; | |
| INT nvmIpxRipFltrSysInstance | 1.3.6.1.4.1.335.1.4.12.24.1.1 | INTEGER | read-write | NAME = ; DESC = The unique identifier of the instance \ of the IPX to which this row corresponds.; HELP = ; CAPABILITIES = ; |
| NET nvmIpxRipFltrNetNumber | 1.3.6.1.4.1.335.1.4.12.24.1.2 | NetNumber | read-write | NAME = ; DESC = The network portion of the IPX address; HELP = ; CAPABILITIES = ; |
| INT nvmIpxRipFltrPort | 1.3.6.1.4.1.335.1.4.12.24.1.3 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates \ whether the filtering is applied on \ the WAN ports or the ethernet ports.; HELP = ; CAPABILITIES = ; |
| INT nvmIpxRipFltrRowStatus | 1.3.6.1.4.1.335.1.4.12.24.1.4 | INTEGER | read-write | NAME = ; DESC = This object is used to add new rows \ or modify and delete existing rows \ in this table(nvmIpxRipFltrTable).; HELP = To add a new row, createAndGo (4) is used. \ To modify an existing row, active (1) is \ used. To delete an existing row, \ destroy (6) is used. ; CAPABILITIES = ; |
| nvmIpxSapFltrTable | 1.3.6.1.4.1.335.1.4.12.25 | not-accessible | NAME = ; DESC = Information describing the configured \ parameters and cumulative statistics \ of the router's attached areas.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmIpxSapFltrEntry | 1.3.6.1.4.1.335.1.4.12.25.1 | not-accessible | NAME = ; DESC = Indicates an entry in the Sap Filter \ table. HELP = ; CAPABILITIES = ; | |
| INT nvmIpxSapFltrSysInstance | 1.3.6.1.4.1.335.1.4.12.25.1.1 | INTEGER | read-write | NAME = ; DESC = The unique identifier of the instance \ of the IPX to which this row corresponds.; HELP = ; CAPABILITIES = ; |
| SAP nvmIpxSapFltrSapType | 1.3.6.1.4.1.335.1.4.12.25.1.2 | SapType | read-write | NAME = ; DESC = The SAP of the packet; HELP = ; CAPABILITIES = ; |
| INT nvmIpxSapFltrPort | 1.3.6.1.4.1.335.1.4.12.25.1.3 | INTEGER | read-write | NAME = ; DESC = The value of this object indicates \ whether the filtering is applied on \ the WAN ports or the ethernet ports.; HELP = ; CAPABILITIES = ; |
| INT nvmIpxSapFltrRowStatus | 1.3.6.1.4.1.335.1.4.12.25.1.4 | INTEGER | read-write | NAME = ; DESC = This object is used to add new rows \ or modify and delete existing rows \ in this table(nvmIpxSapFltrTable).; HELP = To add a new row, createAndGo (4) is used. \ To modify an existing row, active (1) is \ used. To delete an existing row, \ destroy (6) is used. ; CAPABILITIES = ; |
| INT nvmIpxNetFltrRowStatus | 1.3.6.1.4.1.335.1.4.12.26.1.5 | INTEGER | read-write | NAME = ; DESC = This object is used to add new rows \ or modify and delete existing rows \ in this table(nvmIpxNetFltrTable).; HELP = To add a new row, createAndGo (4) is used. \ To modify an existing row, active (1) is \ used. To delete an existing row, \ destroy (6) is used. ; CAPABILITIES = ; |
RFC description
MICOM bridge MIB for managing IPX filtering including RIP filter tables, SAP filter tables, and network filter configurations.
Start monitoring Legacy Micom routing equipment (obsolete IPX/NVM filtering) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.