All MIBs › MICOMBRGEXT
Category: Bridging
Description: Provides MICOM proprietary extensions to standard bridging MIB objects.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MICOMBRGEXT?
This is a MICOM Communications vendor MIB module providing proprietary extensions to standard bridging MIB objects, adding MICOM-specific bridge behavior configuration and monitoring on top of the base bridge model. It exposes bridge-wide settings such as IP-bridging mode, number of bridged interfaces, spanning tree and IP address spoofing enable flags, MAC address aging time, debug flags, and a per-port configuration table, plus spoof cache aging/threshold parameters and bridge counters. Its monitoring value includes both configuration state (spanning tree/spoofing enabled, aging time) and operational counters (mcmBrgCntr) that reveal bridge traffic/error activity, useful for diagnosing bridging loops, excessive MAC aging churn, or misbehaving spoof-detection thresholds. As its name indicates, it is explicitly built as a MICOM extension to the standard Bridge MIB (RFC 1493 / BRIDGE-MIB), adding proprietary objects alongside that standard model. It would be deployed on MICOM bridging-capable WAN/LAN access equipment where standard bridge MIB data is supplemented with MICOM-specific spoofing and debug controls. Engineers can download the MICOMBRGEXT file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MICOMBRGEXT. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- MICOM bridging-capable WAN/LAN access equipment
Monitoring Examples
An operator would poll mcmBrgNumInterfaces and mcmBrgSpanEnable to confirm how many interfaces are bridged and whether spanning tree is active, helping diagnose an unexpected bridging loop. mcmBrgSpoofEnable together with mcmBrgSpoofCacheAge and mcmBrgSpoofThresholdAge/ThresholdCount would be checked when tuning or troubleshooting the device's anti-spoofing cache behavior. mcmBrgConfPortTable indexed by mcmBrgConfPortIndex lets an admin review per-port bridge configuration, while mcmBrgCntr provides bridge-wide traffic/error counters and mcmBrgAgeTime confirms the configured MAC address aging interval.
What Can Be Monitored
- bridged interface count
- spanning tree enable state
- IP spoofing detection settings
- MAC address aging time
- bridge port configuration
- bridge counters
This MIB depends on
Related MIBs
Imported Objects
From MICOM-OSCAR-MIB
| micom-oscar |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mcmBrg | 1.3.6.1.4.1.335.1.4.6 | |||
| mcmBrgGlobalParamGroup | 1.3.6.1.4.1.335.1.4.6.1 | |||
| INT mcmBrgIPBridged | 1.3.6.1.4.1.335.1.4.6.1.1 | INTEGER | read-only | NAME = ; DESC = IP is being bridged or Routed.; HELP = Is IP being Bridged or Routed?; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT mcmBrgNumInterfaces | 1.3.6.1.4.1.335.1.4.6.1.2 | INTEGER | read-only | NAME = ; DESC = The number of ports(ethernet & wan) \ that the access device has.; HELP = The number of ports this bridge has.; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT mcmBrgSpanEnable | 1.3.6.1.4.1.335.1.4.6.1.3 | INTEGER | read-only | NAME = ; DESC = The current state of the Spanning \ tree Algorithm on the access device.; HELP = Spanning-Tree Algorithm Enabled?; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT mcmBrgSpoofEnable | 1.3.6.1.4.1.335.1.4.6.1.4 | INTEGER | read-only | NAME = ; DESC = IP-ARP spoofing -when enabled, access device \ intercepts most ARP bcasts and handle them locally \ to reduce the amount of bcast pkts fwded across WAN.; HELP = IP-ARP Spoofing Enabled?; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT mcmBrgAgeTime | 1.3.6.1.4.1.335.1.4.6.1.5 | INTEGER | read-only | NAME = ; DESC = Aging time for dynamically learned devices \ in forwarding Table.; HELP = The timeout period in seconds for aging \ out dynamically learned forwarding \ information. 802.1D-1990 recommends \ a default of 300 seconds. Mirror object \ of dot1dTpAgingTime.; CAPABILITIES = NET_CFG, VPN_CFG; |
| mcmBrgMiscParamGroup | 1.3.6.1.4.1.335.1.4.6.2 | |||
| INT mcmBrgDebugEnable | 1.3.6.1.4.1.335.1.4.6.2.1 | INTEGER | read-write | NAME = ; DESC = The access device capability to generate controlled \ number of debugging messages to CLI for \ the purpose of debugging some bridge \ status.; HELP = Bridge Debugging Enabled?; CAPABILITIES = NET_CFG, VPN_DISP; |
| INT mcmBrgSpanDebugEnable | 1.3.6.1.4.1.335.1.4.6.2.2 | INTEGER | read-write | NAME = ; DESC = The access device capability to debug spanning \ tree algorithm.; HELP = Spanning-Tree Debugging Enabled?; CAPABILITIES = NET_CFG, VPN_DISP; |
| INT mcmBrgSpoofCacheAge | 1.3.6.1.4.1.335.1.4.6.2.3 | INTEGER | read-write | NAME = ; DESC = The aging time for entries in the ARP Spoof\ cache table to specified by the cache timeout \ to make room for active entries.; HELP = The Aging Time for the ARP Spoof Cache.; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT mcmBrgSpoofThresholdAge | 1.3.6.1.4.1.335.1.4.6.2.4 | INTEGER | read-write | NAME = ; DESC = The Aging Time for the ARP Spoofcache Threshold \ in seconds.(60 .. 1800 sec).; HELP = The Aging Time for the ARP Spoof Threshold.; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT mcmBrgSpoofThresholdCount | 1.3.6.1.4.1.335.1.4.6.2.5 | INTEGER | read-write | NAME = ; DESC = The ARP Spoof Threshold count- allows \ the max number of consecutive outstanding \ ARP request per destination node.; HELP = The ARP Spoof Threshold count.; CAPABILITIES = NET_CFG, VPN_CFG; |
| mcmBrgConfPortTable | 1.3.6.1.4.1.335.1.4.6.3 | not-accessible | NAME = ; DESC = A config Table that contains port-specific \ information for the access device Bridge \ Configuration information.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmBrgConfPortEntry | 1.3.6.1.4.1.335.1.4.6.3.1 | not-accessible | NAME = ; DESC = Configuration parameter information maintained by \ each Port that are being used by the access \ device.; HELP = ; CAPABILITIES = ; | |
| INT mcmBrgConfPortIndex | 1.3.6.1.4.1.335.1.4.6.3.1.1 | INTEGER | read-only | NAME = ; DESC = The Port Index to which this entry pertains.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgConfPortPPA | 1.3.6.1.4.1.335.1.4.6.3.1.2 | INTEGER | read-only | NAME = ; DESC = The Protocol Point of Access to which \ this entry pertains.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgConfPortType | 1.3.6.1.4.1.335.1.4.6.3.1.3 | INTEGER | read-only | NAME = ; DESC = The Type of the interface this port \ is attached to.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgConfPortMacFilterFlag | 1.3.6.1.4.1.335.1.4.6.3.1.4 | INTEGER | read-write | NAME = ; DESC = When MAC address filtering is needed on a \ specific port, enable MAC filter Flag. \ Otherwise, disable the MAC Filetr Flag.; HELP = Is MAC Filtering enabled?; CAPABILITIES = ; |
| INT mcmBrgConfPortEtFilterFlag | 1.3.6.1.4.1.335.1.4.6.3.1.5 | INTEGER | read-write | NAME = ; DESC = When E-type filtering is needed on a specific \ port, enable E-type filter Flag. Otherwise, \ disable E-type Filter Flag.; HELP = Is E-type Filtering enabled?; CAPABILITIES = ; |
| INT mcmBrgConfPortSapFilterFlag | 1.3.6.1.4.1.335.1.4.6.3.1.6 | INTEGER | read-write | NAME = ; DESC = When SAP filtering is needed on a specific \ port, enable SAP filter flag. Otherwise, \ disable the SAP filter flag.; HELP = Is SAP Filtering enabled?; CAPABILITIES = ; |
| INT mcmBrgConfPortMacInclExcl | 1.3.6.1.4.1.335.1.4.6.3.1.7 | INTEGER | read-write | NAME = ; DESC = If Inclusive MAC filtering is set, only \ addresses in the table are filtered/discarded.\ If Exclusive, allow only addresses in the \ table to be accepted/learned.; HELP = Inclusive or Exclusive Mac Filtering?; CAPABILITIES = ; |
| INT mcmBrgConfPortEtInclExcl | 1.3.6.1.4.1.335.1.4.6.3.1.8 | INTEGER | read-write | NAME = ; DESC = If Inclusive E-Type filtering is set, only \ E-Type in the table are filtered/discarded.\ If Exclusive, allow only E-Type in the \ table to be accepted/learned.; HELP = Inclusive or Exclusive Et Filtering?; CAPABILITIES = ; |
| INT mcmBrgConfPortSapInclExcl | 1.3.6.1.4.1.335.1.4.6.3.1.9 | INTEGER | read-write | NAME = ; DESC = If Inclusive Sap Type filtering is set, only \ Sap Types in the Table are filtered/discarded. \ If Exclusive, allow only Sap Types in the \ table to be accepted/learned.; HELP = Inclusive or Exclusive Sap Filtering?; CAPABILITIES = ; |
| mcmBrgMacFilterTable | 1.3.6.1.4.1.335.1.4.6.4 | not-accessible | NAME = ; DESC = A table that contains port-specific \ information for the access device MAC Filter \ info including the source & destination.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmBrgMacFilterEntry | 1.3.6.1.4.1.335.1.4.6.4.1 | not-accessible | NAME = ; DESC = MAC Filter parameter information maintained by \ every port that the access device uses.; HELP = ; CAPABILITIES = ; | |
| INT mcmBrgMacFilterPortIndex | 1.3.6.1.4.1.335.1.4.6.4.1.1 | INTEGER | read-write | NAME = ; DESC = The Port Index particular to this entry.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgMacFilterNumber | 1.3.6.1.4.1.335.1.4.6.4.1.2 | INTEGER | read-write | NAME = ; DESC = The Filter number associated with the entry.; HELP = ; CAPABILITIES = ; |
| MAC mcmBrgMacAddress | 1.3.6.1.4.1.335.1.4.6.4.1.3 | MacAddress | read-write | NAME = ; DESC = The MAC address(HW address) that needs to be \ filtered.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgMacType | 1.3.6.1.4.1.335.1.4.6.4.1.4 | INTEGER | read-write | NAME = ; DESC = Filter based on source MAC address or \ destination MAC address.; HELP = The type of the MAC Address. By setting \ it to invalid one can invalidate the \ entry.; CAPABILITIES = ; |
| mcmBrgEtFilterTable | 1.3.6.1.4.1.335.1.4.6.5 | not-accessible | NAME = ; DESC = A table that contains port-specific \ information for the access device \ E-type Filter.; HELP = CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmBrgEtFilterEntry | 1.3.6.1.4.1.335.1.4.6.5.1 | not-accessible | NAME = ; DESC = A list of information maintained by \ each port about the access device \ E-type Filter parameters for that port.; HELP = CAPABILITIES = ; | |
| INT mcmBrgEtFilterPortIndex | 1.3.6.1.4.1.335.1.4.6.5.1.1 | INTEGER | read-write | NAME = ; DESC = The port Index particular to this port.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgEtFilterNumber | 1.3.6.1.4.1.335.1.4.6.5.1.2 | INTEGER | read-write | NAME = ; DESC = The Filter number associated with the \ port Index.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgEtFilterStatus | 1.3.6.1.4.1.335.1.4.6.5.1.3 | INTEGER | read-write | NAME = ; DESC = An indication as to whether the filter \^M is specified as a single e-type or as a range of \ as a range of e-types.; ; HELP = HELP = Setting the value tp invalid, has the effect of \ the entry,; CAPABILITIES = ; |
| INT mcmBrgEtFilterEType | 1.3.6.1.4.1.335.1.4.6.5.1.4 | INTEGER | read-write | NAME = ; DESC = The singular e-type to be filtered.; HELP = The value of this object is valid only \ if the mcmBrgEtFilterStatus (above) \ is singular.; CAPABILITIES = ; |
| INT mcmBrgEtFilterUpperRange | 1.3.6.1.4.1.335.1.4.6.5.1.5 | INTEGER | read-write | NAME = ; DESC = DESC = The Upper Range of the E-type to be \ filtered. Range is between 0 - 65535.; HELP = This object is valid only if the \ mcmBrgEtFilterStatus (above) is range.; CAPABILITIES = ; |
| INT mcmBrgEtFilterLowerRange | 1.3.6.1.4.1.335.1.4.6.5.1.6 | INTEGER | read-write | NAME = ; DESC = The lower Range of the E-type to be \ filtered. Range is between 0 - 65535.; HELP = This object is valid only \ if the mcmBrgEtFilterStatus (above) \ is range.; CAPABILITIES = ; |
| mcmBrgSapFilterTable | 1.3.6.1.4.1.335.1.4.6.6 | not-accessible | NAME = ; DESC = A table that contains port-specific \ information for the access device E-type \ Filter information. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmBrgSapFilterEntry | 1.3.6.1.4.1.335.1.4.6.6.1 | not-accessible | NAME = ; DESC = A list of information maintained by \ every port about the access device E-type Filter \ parameters for that port. (Operational); HELP = ; CAPABILITIES = ; | |
| INT mcmBrgSapFilterPortIndex | 1.3.6.1.4.1.335.1.4.6.6.1.1 | INTEGER | read-write | NAME = ; DESC = ; HELP = The Port Index to which this entry pertains.; CAPABILITIES = ; |
| INT mcmBrgSapFilterNumber | 1.3.6.1.4.1.335.1.4.6.6.1.2 | INTEGER | read-write | NAME = ; DESC = The Filter number associated with the \ port Index.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgSapFilterStatus | 1.3.6.1.4.1.335.1.4.6.6.1.3 | INTEGER | read-write | NAME = ; DESC = An indication as to whether the filter \ is specified as a single e-type or \ as a range of e-types.; HELP = Setting the value to invalid has the \ effect of deleteing the entry.;; CAPABILITIES = ; |
| INT mcmBrgSapFilterEType | 1.3.6.1.4.1.335.1.4.6.6.1.4 | INTEGER | read-write | NAME = ; DESC = The singular e-type to be filtered.; HELP = The value of this object is valid only \ if the mcmBrgSapFilterStatus (above) \ is singular.; CAPABILITIES = ; |
| INT mcmBrgSapFilterUpperRange | 1.3.6.1.4.1.335.1.4.6.6.1.5 | INTEGER | read-write | NAME = ; DESC = The Upper Range of the E-type to be \ filtered.; HELP = This object is valid only if the \ mcmBrgSapFilterStatus (above) \ is range.; CAPABILITIES = ; |
| INT mcmBrgSapFilterLowerRange | 1.3.6.1.4.1.335.1.4.6.6.1.6 | INTEGER | read-write | NAME = ; DESC = The lower Range of the E-type to be \ filtered.; HELP = This object is valid only if the \ mcmBrgSapFilterStatus (above) \ is range.; CAPABILITIES = ; |
| nvmBrgGlobalParamGroup | 1.3.6.1.4.1.335.1.4.6.7 | |||
| INT nvmBrgIPBridged | 1.3.6.1.4.1.335.1.4.6.7.1 | INTEGER | read-write | NAME = ; DESC = IP is being bridged or Routed in the access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT nvmBrgNumInterfaces | 1.3.6.1.4.1.335.1.4.6.7.2 | INTEGER | read-write | NAME = ; DESC = The number of ethernet and WAN ports that \ the access device has.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT nvmBrgSpanEnable | 1.3.6.1.4.1.335.1.4.6.7.3 | INTEGER | read-write | NAME = ; DESC = The current state of the Spanning \ tree Algorithm on the access device is enabled \ or disabled.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT nvmBrgSpoofEnable | 1.3.6.1.4.1.335.1.4.6.7.4 | INTEGER | read-write | NAME = ; DESC = IP-ARP spoofing -when enabled,access device intercepts\ most ARP bcasts and handle them locally to \ reduce the amount of bcast pkts fwded across WAN.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT nvmBrgAgeTime | 1.3.6.1.4.1.335.1.4.6.7.5 | INTEGER | read-write | NAME = ; DESC = Aging time for dynamically learned devices \ in forwarding Table.; HELP = The timeout period in seconds for aging \ out dynamically learned forwarding \ information. 802.1D-1990 recommends \ a default of 300 seconds. Mirror object \ of dot1dTpAgingTime.; CAPABILITIES = NET_CFG, VPN_CFG; |
| nvmBrgMiscParamGroup | 1.3.6.1.4.1.335.1.4.6.8 | |||
| INT nvmBrgDebugEnable | 1.3.6.1.4.1.335.1.4.6.8.1 | INTEGER | read-write | NAME = ; DESC = The access device's capability to generate controlled \ number of debugging messages to CLI for \ the purpose of debugging some bridge \ status.; HELP = Bridge Debugging Enabled?; CAPABILITIES = NET_CFG, VPN_DISP; |
| INT nvmBrgSpanDebugEnable | 1.3.6.1.4.1.335.1.4.6.8.2 | INTEGER | read-write | NAME = ; DESC = The access device's capability to debug spanning \ tree algorithm.; HELP = Spanning-Tree Debugging Enabled?; CAPABILITIES = NET_CFG, VPN_DISP; |
| INT nvmBrgSpoofCacheAge | 1.3.6.1.4.1.335.1.4.6.8.3 | INTEGER | read-write | NAME = ; DESC = The aging time for entries in the ARP Spoof\ cache table to specified by the cache timeout \ to make room for active entries.; HELP = The Aging Time for the ARP Spoof Cache.; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT nvmBrgSpoofThresholdAge | 1.3.6.1.4.1.335.1.4.6.8.4 | INTEGER | read-write | NAME = ; DESC = The Aging Time for the ARP Spoofcache Threshold \ in seconds.(60 .. 1800 sec); HELP = The Aging Time for the ARP Spoof Threshold.; CAPABILITIES = NET_CFG, VPN_CFG; |
| INT nvmBrgSpoofThresholdCount | 1.3.6.1.4.1.335.1.4.6.8.5 | INTEGER | read-write | NAME = ; DESC = The ARP Spoof Threshold count- allows \ the max number of consecutive outstanding \ ARP request per dest node.; HELP = The ARP Spoof Threshold count.; CAPABILITIES = NET_CFG, VPN_CFG; |
| nvmBrgStpParamGroup | 1.3.6.1.4.1.335.1.4.6.9 | |||
| INT nvmBrgPriority | 1.3.6.1.4.1.335.1.4.6.9.1 | INTEGER | read-write | NAME = ; DESC = The value of the write-able portion \ of the Bridge ID, i.e., the first two \ octets of the (8 octet long) Bridge ID.; HELP = The other (last) 6 octets of the \ Bridge ID are given by the value of \ dot1dBaseBridgeAddress. This is Mirror \ object to dot1dStpPriority.; CAPABILITIES = NET_CFG, VPN_CFG; |
| TIM nvmBrgMaxAge | 1.3.6.1.4.1.335.1.4.6.9.2 | Timeout | read-write | NAME = ; DESC = The maximum age of Spanning Tree Protocol \ information learned from the network \ on any port before it is discarded, \ in units of hundredths of a second.; HELP = This is the programmed value of the \ dot1dStpBridgeMaxAge.; CAPABILITIES = NET_CFG, VPN_CFG; |
| TIM nvmBrgFwdDelay | 1.3.6.1.4.1.335.1.4.6.9.3 | Timeout | read-write | NAME = ; DESC = The value that all bridges use for \ ForwardDelay when this bridge is \ acting as the root.; HELP = Note that 802.1D-1990 specifies that \ the range for this parameter is related \ to the value of dot1dStpBridgeMaxAge. \ The granularity of this timer is specified \ by 802.1D-1990 to be 1 second. An agent \ may return a badValue error if a set \ is attempted to a value which is not \ a whole number of seconds. Mirror object \ of dot1dStpBridgeForwardDelay; CAPABILITIES = NET_CFG, VPN_CFG; |
| TIM nvmBrgHelloTime | 1.3.6.1.4.1.335.1.4.6.9.4 | Timeout | read-write | NAME = ; DESC = The value that all bridges use for HelloTime \ when this bridge is acting as the root.; HELP = The granularity of this timer is specified \ by 802.1D- 1990 to be 1 second. An \ agent may return a badValue error if \ a set is attempted to a value which \ is not a whole number of seconds. Mirror \ object of dot1dStpBridgeHelloTime.; CAPABILITIES = NET_CFG, VPN_CFG; |
| nvmBrgConfPortTable | 1.3.6.1.4.1.335.1.4.6.10 | not-accessible | NAME = ; DESC = A config table that contains port-specific \ information for tha access device Bridge Configuration \ information.; HELP = A table that contains port-specific \ information for the access device Biidge Config \ information.; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmBrgConfPortEntry | 1.3.6.1.4.1.335.1.4.6.10.1 | not-accessible | NAME = ; DESC = A list of information maintained by \ each Port that are being used by the access device, \ about conf. parameters for that port.; HELP = ; CAPABILITIES = ; | |
| INT nvmBrgConfPortIndex | 1.3.6.1.4.1.335.1.4.6.10.1.1 | INTEGER | read-write | NAME = ; DESC = The Port Index to which this entry pertains.; HELP = ; CAPABILITIES = ; |
| INT nvmBrgConfPortType | 1.3.6.1.4.1.335.1.4.6.10.1.2 | INTEGER | read-write | NAME = ; DESC = The Type of the interface this port \ is attached to. \ This object only supported enumerations of \ ethernet and frameRelay.; HELP = ; CAPABILITIES = ; |
| INT nvmBrgConfPortEnable | 1.3.6.1.4.1.335.1.4.6.10.1.3 | INTEGER | read-write | NAME = ; DESC = The status of the Port is enabled/disabled.; HELP = Mirror object of dot1dStpPortEnable.; CAPABILITIES = ; |
| INT nvmBrgConfPortPriority | 1.3.6.1.4.1.335.1.4.6.10.1.4 | INTEGER | read-write | NAME = ; DESC = The value of the priority field which \ is contained in the first (in network \ byte order) octet of the port ID.; HELP = It's the mirror object of dot1dStpPortPriority.; CAPABILITIES = ; |
| INT nvmBrgConfPortPathCost | 1.3.6.1.4.1.335.1.4.6.10.1.5 | INTEGER | read-write | NAME = ; DESC = The contribution of this port to the \ path cost of paths towards the spanning \ tree root which include this port.; HELP = 802.1D-1990 recommends that the default \ value of this parameter be in inverse \ proportion to the speed of the attached \ LAN. Mirror object of dot1dStpPortPathCost.; CAPABILITIES = ; |
| INT nvmBrgConfPortMacFilterFlag | 1.3.6.1.4.1.335.1.4.6.10.1.6 | INTEGER | read-write | NAME = ; DESC = When MAC address filtering is needed on a \ specific port, enable MAC filter Flag. Otherwise, \ disable the MAC Filetr Flag.; HELP = Is MAC Filtering enabled?; CAPABILITIES = ; |
| INT nvmBrgConfPortEtFilterFlag | 1.3.6.1.4.1.335.1.4.6.10.1.7 | INTEGER | read-write | NAME = ; DESC = When E-type filtering is needed on a specific \ port, enable E-type filter Flag. Otherwise,When \ disable E-type Filter Flag.; HELP = Is E-type Filtering enabled?; CAPABILITIES = ; |
| INT nvmBrgConfPortSapFilterFlag | 1.3.6.1.4.1.335.1.4.6.10.1.8 | INTEGER | read-write | NAME = ; DESC = When SAP filtering is needed on a specific \ port, enable SAP filter flag. Otherwise, \ disable the SAP filter flag.; HELP = Is SAP Filtering enabled?; CAPABILITIES = ; |
| INT nvmBrgConfPortMacInclExcl | 1.3.6.1.4.1.335.1.4.6.10.1.9 | INTEGER | read-write | NAME = ; DESC = ; HELP = Inclusive or Exclusive Mac Filtering?; CAPABILITIES = ; |
| INT nvmBrgConfPortEtInclExcl | 1.3.6.1.4.1.335.1.4.6.10.1.10 | INTEGER | read-write | NAME = ; DESC = ; HELP = Inclusive or Exclusive Et Filtering?; CAPABILITIES = ; |
| INT nvmBrgConfPortSapInclExcl | 1.3.6.1.4.1.335.1.4.6.10.1.11 | INTEGER | read-write | NAME = ; DESC = ; HELP = Inclusive or Exclusive Sap Filtering?; CAPABILITIES = ; |
| nvmBrgMacFilterTable | 1.3.6.1.4.1.335.1.4.6.11 | not-accessible | NAME = ; DESC = ; HELP = A table that contains port-specific \ information for the access device MAC Filter \ information.; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmBrgMacFilterEntry | 1.3.6.1.4.1.335.1.4.6.11.1 | not-accessible | NAME = ; DESC = ; HELP = A list of information maintained by \ every port about the access device MAC Filter \ parameters for that port.; CAPABILITIES = ; | |
| INT nvmBrgMacFilterPortIndex | 1.3.6.1.4.1.335.1.4.6.11.1.1 | INTEGER | read-only | NAME = ; DESC = ; HELP = The Port Index to which this entry pertains.; CAPABILITIES = ; |
| INT nvmBrgMacFilterNumber | 1.3.6.1.4.1.335.1.4.6.11.1.2 | INTEGER | read-only | NAME = ; DESC = ; HELP = The Port Index to which this entry pertains.; CAPABILITIES = ; |
| MAC nvmBrgMacAddress | 1.3.6.1.4.1.335.1.4.6.11.1.3 | MacAddress | read-only | NAME = ; DESC = ; HELP = The MAC Address which needs to be filtered.; CAPABILITIES = ; |
| INT nvmBrgMacType | 1.3.6.1.4.1.335.1.4.6.11.1.4 | INTEGER | read-only | NAME = ; DESC = ; HELP = The type of the MAC Address. By setting \ it to invalid one can invalidate the \ entry.; CAPABILITIES = ; |
| nvmBrgEtFilterTable | 1.3.6.1.4.1.335.1.4.6.12 | not-accessible | NAME = ; DESC = DESC = A table that contains port-specific \ information for the access device E-type Filter.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmBrgEtFilterEntry | 1.3.6.1.4.1.335.1.4.6.12.1 | not-accessible | NAME = ; DESC = A list of information maintained by \ each port about the access device E-type Filter \ parameters for that port.; Help = ; CAPABILITIES = ; | |
| INT nvmBrgEtFilterPortIndex | 1.3.6.1.4.1.335.1.4.6.12.1.1 | INTEGER | read-only | NAME = ; DESC = The port Index particular to this port.; HELP = ; CAPABILITIES = ; |
| INT nvmBrgEtFilterNumber | 1.3.6.1.4.1.335.1.4.6.12.1.2 | INTEGER | read-only | NAME = ; DESC = The Filter number associated with the \ port Index.; HELP = ; CAPABILITIES = ; |
| INT nvmBrgEtFilterStatus | 1.3.6.1.4.1.335.1.4.6.12.1.3 | INTEGER | read-only | NAME = ; DESC = An indication as to whether the filter \ is specified as a single e-type or \ as a range of e-types.; HELP = Setting the value to invalid has the \ the effect of deleting the entry.; CAPABILITIES = ; |
| INT nvmBrgEtFilterEType | 1.3.6.1.4.1.335.1.4.6.12.1.4 | INTEGER | read-only | NAME = ; DESC = The singular e-type to be filters.; HELP = The value of this object is valid only \ if the mcmBrgEtFilterStatus (above) \ is singular.; CAPABILITIES = ; |
| INT nvmBrgEtFilterUpperRange | 1.3.6.1.4.1.335.1.4.6.12.1.5 | INTEGER | read-only | NAME = ; DESC = The Upper Range of the E-type to be \ filtered. Range is between 0 - 65535.; HELP = This object is valid only if the \ mcmBrgEtFilterStatus (above) is range.; CAPABILITIES = ; |
| INT nvmBrgEtFilterLowerRange | 1.3.6.1.4.1.335.1.4.6.12.1.6 | INTEGER | read-only | NAME = ; DESC = The lower Range of the E-type to be \ filtered. Range is between 0 - 65535.; HELP = This object is valid only \ if the mcmBrgEtFilterStatus (above) \ is range.; CAPABILITIES = ; |
| nvmBrgSapFilterTable | 1.3.6.1.4.1.335.1.4.6.13 | not-accessible | NAME = ; DESC = A table that contains port-specific \ information for the access device E-type \ Filter information.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; | |
| nvmBrgSapFilterEntry | 1.3.6.1.4.1.335.1.4.6.13.1 | not-accessible | NAME = ; DESC = A list of information maintained by \ every port about the access device E-type Filter \ parameters for that port.; HELP = ; CAPABILITIES = ; | |
| INT nvmBrgSapFilterPortIndex | 1.3.6.1.4.1.335.1.4.6.13.1.1 | INTEGER | read-write | NAME = ; DESC = The Port Index to which this entry pertains.; HELP = ; CAPABILITIES = ; |
| INT nvmBrgSapFilterNumber | 1.3.6.1.4.1.335.1.4.6.13.1.2 | INTEGER | read-write | NAME = ; DESC = The Filter number associated with the \ port Index.; HELP = ; CAPABILITIES = ; |
| INT nvmBrgSapFilterStatus | 1.3.6.1.4.1.335.1.4.6.13.1.3 | INTEGER | read-write | NAME = ; DESC = An indication as to whether the filter \ is specified as a single e-type or \ as a range of e-types.; HELP = Setting the value to invalid has the \ effect of deleteing the entry.; CAPABILITIES = ; |
| INT nvmBrgSapFilterEType | 1.3.6.1.4.1.335.1.4.6.13.1.4 | INTEGER | read-write | NAME = ; DESC = The singular e-type to be filtered. \ HELP = The value of this object is valid only \ if the mcmBrgSapFilterStatus (above) \ is singular.; CAPABILITIES = ; |
| INT nvmBrgSapFilterUpperRange | 1.3.6.1.4.1.335.1.4.6.13.1.5 | INTEGER | read-write | NAME = ; DESC = The Upper Range of the E-type to be \ filtered.; HELP = This object is valid only if the \ mcmBrgSapFilterStatus (above) \ is range.; CAPABILITIES = ; |
| INT nvmBrgSapFilterLowerRange | 1.3.6.1.4.1.335.1.4.6.13.1.6 | INTEGER | read-write | NAME = ; DESC = The lower Range of the E-type to be \ filtered.; HELP = This object is valid only if the \ mcmBrgSapFilterStatus (above) \ is range.; CAPABILITIES = ; |
| mcmBrgCntr | 1.3.6.1.4.1.335.1.4.6.14 | |||
| mcmBrgPortCntrZeroTable | 1.3.6.1.4.1.335.1.4.6.14.1 | not-accessible | NAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ A table that contains port-specific \ information for access device Port Counter \ Zeroing.; HELP =; CAPABILITIES = NET_CFG, VPN_CFG; | |
| mcmBrgPortCntrZeroEntry | 1.3.6.1.4.1.335.1.4.6.14.1.1 | not-accessible | NAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ A list of information maintained by \ every port about the access device E-type Filter \ parameters for that port.; HELP = ; CAPABILITIES = ; | |
| INT mcmBrgPortCntrZeroIndex | 1.3.6.1.4.1.335.1.4.6.14.1.1.1 | INTEGER | read-write | NAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ The Port Index to which this entry pertains.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgBasePortCounterZero | 1.3.6.1.4.1.335.1.4.6.14.1.1.2 | INTEGER | write-only | NAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the Base port Counters \ should be zeroed out.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgStpPortCounterZero | 1.3.6.1.4.1.335.1.4.6.14.1.1.3 | INTEGER | write-only | NAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the spanning Tree port \ counters will be zeroed out.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgTpPortCounterZero | 1.3.6.1.4.1.335.1.4.6.14.1.1.4 | INTEGER | write-only | NAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the Transparent port \ counters will be zeroed out.; HELP = ; CAPABILITIES = ; |
| mcmBrgCounterZero | 1.3.6.1.4.1.335.1.4.6.14.2 | |||
| INT mcmBrgStpCounterZero | 1.3.6.1.4.1.335.1.4.6.14.2.1 | INTEGER | write-only | NAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the spanning Tree port \ counters will be zeroed out.; HELP = ; CAPABILITIES = ; |
| INT mcmBrgTpCounterZero | 1.3.6.1.4.1.335.1.4.6.14.2.2 | INTEGER | write-only | NAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the Transparent port \ counters will be zeroed out.; HELP = ; CAPABILITIES = ; |
RFC description
Extended bridge MIB for Micom access devices providing port configuration, spanning tree, and Ethernet filtering management.
Start monitoring MICOM bridging-capable WAN/LAN access equipment (bridge extension) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.