Description: NAME = ; DESC = This object is used to set the mode of the unit \ activation after reading the configuration file. \ disabled (2): The GCM does not change the objects \ mcmGcmUnitAdminStatus in the GCM Unit \ table after reading the configuration file. \ hwCfgAutoSelect (1): After reading the configuration \ file, the GCM activates only one of the three GCM \ Units depending on the hardware configuration. \ The stored configuration for the object \ mcmGcmUnitAdminStatus will be ignored. \ The following association between the GCM Unit \ rows and hardware configuration exists: \ Row 1: Port 2 and (optional) 3 with Serial WAN \ card; Port 2 is the Primary port. \ Row 2: Port 2 with Serial WAN card, Port 3 with \ ISDN card, Port 2 is the Primary port. \ Row 3: Port 2 and (optional) 3 with ISDN, Port 2 \ is the Primary port. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP ;