All MIBs › MICOM-CSU-MIB › mcmT1E1CsuCfgLineBuildOut
mcmT1E1CsuCfgLineBuildOut
Module: MICOM-CSU-MIB
OID (symbolic): MICOM-CSU-MIB::mcmT1E1CsuCfgLineBuildOut
OID (numeric): 1.3.6.1.4.1.335.1.4.29.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: NAME = ; DESC = The value of this object selects the T1/E1 CSU \ line build out. For a T1 CSU, the default value \ is neg-7pt5-db (6). For an E1 CSU, the default \ value is either ohm-75-normal (9) (an E1 CSU interface \ with 2 BNC connectors) or ohm-120-normal (10) \ (an E1 CSU interface with an RJ48 connector). \ Note that the ranges of enumeration values 1-8 and \ 9-15 apply uniquely to T1 and E1 interfaces; respectively.; HELP = ; CAPABILITIES = ;
What is mcmT1E1CsuCfgLineBuildOut?
Sets the T1/E1 CSU's line build-out (transmit signal level/impedance) setting; enumeration values 1-8 apply only to T1 interfaces (defaulting to neg-7pt5-db) and 9-15 apply only to E1 interfaces (defaulting to ohm-75-normal or ohm-120-normal depending on connector type). An admin adjusts this to match the cable distance to the far-end equipment or network demarcation, since an incorrect line build-out can cause signal reflection or excessive attenuation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.335.1.4.29.1.1.1.4 snmpwalk -v2c -c public <target> MICOM-CSU-MIB::mcmT1E1CsuCfgLineBuildOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.335.1.4.29.1.1.1.4.1 snmpget -v2c -c public <target> MICOM-CSU-MIB::mcmT1E1CsuCfgLineBuildOut.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.335.1.4.29.1.1.1.4.1 i <value>
Start monitoring MICOM Communications T1/E1 CSU equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MICOM-CSU-MIB::mcmT1E1CsuCfgLineBuildOut OID value, configure state conditions and alerts, and monitor any MICOM Communications T1/E1 CSU equipment from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.335 | micom | MICOM-OSCAR-MIB |
| 1.3.6.1.4.1.335.1 | products | MICOM-OSCAR-MIB |
| 1.3.6.1.4.1.335.1.4 | micom_oscar | MICOM-OSCAR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.335.1.4.29 | micom_csu | MICOM-CSU-MIB |
| 1.3.6.1.4.1.335.1.4.29.1 | csu_configuration | MICOM-CSU-MIB |
| 1.3.6.1.4.1.335.1.4.29.1.1 | mcmT1E1CsuCfgTable | MICOM-CSU-MIB |
| 1.3.6.1.4.1.335.1.4.29.1.1.1 | mcmT1E1CsuCfgEntry | MICOM-CSU-MIB |
| 1.3.6.1.4.1.335.1.4.29.1.1.1.4 | mcmT1E1CsuCfgLineBuildOut | MICOM-CSU-MIB |