All MIBs › MERU-CONFIG-PACKETCAPTURE-MIB › mwPacketCaptureProfileUDPPort
mwPacketCaptureProfileUDPPort
Module: MERU-CONFIG-PACKETCAPTURE-MIB
OID (symbolic): MERU-CONFIG-PACKETCAPTURE-MIB::mwPacketCaptureProfileUDPPort
OID (numeric): 1.3.6.1.4.1.15983.1.1.4.17.1.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: This object describes UDP Destination Port
What is mwPacketCaptureProfileUDPPort?
This sets the UDP destination port used when forwarding captured packets to the configured destination IP address. An admin configures this to match the port the receiving capture tool or collector is listening on for incoming captured traffic. For example, setting this to 5555 sends captured packets as UDP traffic to port 5555 on the destination analysis host.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15983 | meru | MERU-SMI |
| 1.3.6.1.4.1.15983.1 | meru_reg | MERU-SMI |
| 1.3.6.1.4.1.15983.1.1 | meru_wlan | MERU-SMI |
| 1.3.6.1.4.1.15983.1.1.4 | mwConfiguration | MERU-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15983.1.1.4.17 | mwConfigPacketCapture | MERU-CONFIG-PACKETCAPTURE-MIB |
| 1.3.6.1.4.1.15983.1.1.4.17.1 | mwPacketCaptureProfileTable | MERU-CONFIG-PACKETCAPTURE-MIB |
| 1.3.6.1.4.1.15983.1.1.4.17.1.1 | mwPacketCaptureProfileEntry | MERU-CONFIG-PACKETCAPTURE-MIB |
| 1.3.6.1.4.1.15983.1.1.4.17.1.1.6 | mwPacketCaptureProfileUDPPort | MERU-CONFIG-PACKETCAPTURE-MIB |