All MIBs › MERU-CONFIG-PACKETCAPTURE-MIB › mwPacketCaptureProfileTokenBucketSize
mwPacketCaptureProfileTokenBucketSize
Module: MERU-CONFIG-PACKETCAPTURE-MIB
OID (symbolic): MERU-CONFIG-PACKETCAPTURE-MIB::mwPacketCaptureProfileTokenBucketSize
OID (numeric): 1.3.6.1.4.1.15983.1.1.4.17.1.1.11
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: This object describes Token Bucket Size
What is mwPacketCaptureProfileTokenBucketSize?
This sets the burst size, in the token bucket rate-limiting scheme, allowed for captured traffic before the sustained rate limit takes over. An admin tunes this to permit short bursts of captured traffic above the sustained rate, accommodating momentary spikes in captured packet volume. For example, a larger bucket size would let a brief burst of captured frames pass through immediately even if it temporarily exceeds the configured token bucket rate.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15983 | meru | MERU-SMI |
| 1.3.6.1.4.1.15983.1 | meru_reg | MERU-SMI |
| 1.3.6.1.4.1.15983.1.1 | meru_wlan | MERU-SMI |
| 1.3.6.1.4.1.15983.1.1.4 | mwConfiguration | MERU-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15983.1.1.4.17 | mwConfigPacketCapture | MERU-CONFIG-PACKETCAPTURE-MIB |
| 1.3.6.1.4.1.15983.1.1.4.17.1 | mwPacketCaptureProfileTable | MERU-CONFIG-PACKETCAPTURE-MIB |
| 1.3.6.1.4.1.15983.1.1.4.17.1.1 | mwPacketCaptureProfileEntry | MERU-CONFIG-PACKETCAPTURE-MIB |
| 1.3.6.1.4.1.15983.1.1.4.17.1.1.11 | mwPacketCaptureProfileTokenBucketSize | MERU-CONFIG-PACKETCAPTURE-MIB |