All MIBs › MERU-CONFIG-PACKETCAPTURE-MIB › mwPacketCaptureProfileDestinationIp
mwPacketCaptureProfileDestinationIp
Module: MERU-CONFIG-PACKETCAPTURE-MIB
OID (symbolic): MERU-CONFIG-PACKETCAPTURE-MIB::mwPacketCaptureProfileDestinationIp
OID (numeric): 1.3.6.1.4.1.15983.1.1.4.17.1.1.5
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-create
Description: This object describes Destination IP Address
What is mwPacketCaptureProfileDestinationIp?
This sets the destination IP address that captured packets are sent to when the profile is operating in L3 connectivity mode. An admin configures this to point at the IP address of the analysis station or packet-capture collector that will receive the exported traffic. For example, setting this to 10.1.1.50 sends captured packets to a Wireshark capture host at that address.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.15983 | meru | MERU-SMI |
| 1.3.6.1.4.1.15983.1 | meru_reg | MERU-SMI |
| 1.3.6.1.4.1.15983.1.1 | meru_wlan | MERU-SMI |
| 1.3.6.1.4.1.15983.1.1.4 | mwConfiguration | MERU-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15983.1.1.4.17 | mwConfigPacketCapture | MERU-CONFIG-PACKETCAPTURE-MIB |
| 1.3.6.1.4.1.15983.1.1.4.17.1 | mwPacketCaptureProfileTable | MERU-CONFIG-PACKETCAPTURE-MIB |
| 1.3.6.1.4.1.15983.1.1.4.17.1.1 | mwPacketCaptureProfileEntry | MERU-CONFIG-PACKETCAPTURE-MIB |
| 1.3.6.1.4.1.15983.1.1.4.17.1.1.5 | mwPacketCaptureProfileDestinationIp | MERU-CONFIG-PACKETCAPTURE-MIB |