MEMOTECADMIN-MIB :: memotecAdminViewInacTimer

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › MEMOTECADMIN-MIB › memotecAdminViewInacTimer

memotecAdminViewInacTimer

Module: MEMOTECADMIN-MIB

OID (symbolic): MEMOTECADMIN-MIB::memotecAdminViewInacTimer

OID (numeric): 1.3.6.1.4.1.495.3.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: THE CX900 DOES NOT SUPPORT THIS OBJECT.

Determines the length of time, in minutes, that an SNMP session can remain inactive before the system logs out the user. Once the timer expires, the user needs to log in again to regain access to the SNMP agent.

The setting of this object is dynamic. The system immediately implements the value you enter.

Range of Values: a maximum of 5 digits from 5 to 65535

Default Value: 30

What is memotecAdminViewInacTimer?

This read-write value (5-65535 minutes, default 30) sets how long an SNMP session can sit idle before the Memotec system automatically logs the user out, requiring a fresh login; the MIB notes the CX900 model does not support this object. On supported models, an admin lowers this timer to tighten security on unattended management sessions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.3.2
snmpwalk -v2c -c public <target> MEMOTECADMIN-MIB::memotecAdminViewInacTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.3.2.1
snmpget -v2c -c public <target> MEMOTECADMIN-MIB::memotecAdminViewInacTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.3.2.1 i <value>

Start monitoring Memotec WAN multiplexer/access device (admin/community access control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MEMOTECADMIN-MIB::memotecAdminViewInacTimer OID value, configure state conditions and alerts, and monitor any Memotec WAN multiplexer/access device (admin/community access control) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.3memotecAdminMEMOTEC-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.3.2memotecAdminViewInacTimerMEMOTECADMIN-MIB