All MIBs › ME1200-RMIRROR-MIB › me1200RmirrorConfigSessionSourcePortMirrorType
me1200RmirrorConfigSessionSourcePortMirrorType
Module: ME1200-RMIRROR-MIB
OID (symbolic): ME1200-RMIRROR-MIB::me1200RmirrorConfigSessionSourcePortMirrorType
OID (numeric): 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.3
Node type: OBJECT-TYPE
Type: ME1200RmirrorMirrorType
Access: read-write
Description: Mirror type on frames to/from port. none(0) means no mirror. tx(1) is to monitor the packets sent from the port. rx(2) is to monitor the packets sent to the port. both(3) is to monitor all packets sent from and to the port.
What is me1200RmirrorConfigSessionSourcePortMirrorType?
This object specifies which direction of traffic is mirrored from a source port for this session: none, tx (outbound packets), rx (inbound packets), or both. Admins use this to scope port mirroring to just the traffic direction relevant to their troubleshooting, reducing the volume of mirrored data. Setting me1200RmirrorConfigSessionSourcePortMirrorType to rx(2) on a source port would mirror only the traffic arriving on that port, not traffic leaving it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.3 snmpwalk -v2c -c public <target> ME1200-RMIRROR-MIB::me1200RmirrorConfigSessionSourcePortMirrorType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.3.1 snmpget -v2c -c public <target> ME1200-RMIRROR-MIB::me1200RmirrorConfigSessionSourcePortMirrorType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.3.1 s <value>
Start monitoring Cisco ME1200 Metro Ethernet switch (remote port mirroring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-RMIRROR-MIB::me1200RmirrorConfigSessionSourcePortMirrorType OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (remote port mirroring) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.120 | me1200RmirrorMib | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1 | me1200RmirrorMibObjects | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1.2 | me1200RmirrorConfig | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.4 | me1200RmirrorConfigSessionSourcePortTable | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1 | me1200RmirrorConfigSessionSourcePortEntry | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.3 | me1200RmirrorConfigSessionSourcePortMirrorType | ME1200-RMIRROR-MIB |