All MIBs › ME1200-RMIRROR-MIB › me1200RmirrorConfigSessionSourceCpuMirrorType
me1200RmirrorConfigSessionSourceCpuMirrorType
Module: ME1200-RMIRROR-MIB
OID (symbolic): ME1200-RMIRROR-MIB::me1200RmirrorConfigSessionSourceCpuMirrorType
OID (numeric): 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.3
Node type: OBJECT-TYPE
Type: ME1200RmirrorMirrorType
Access: read-write
Description: Mirror type on packets to/from CPU. none(0) means no mirror. tx(1) is to monitor the packets sent from CPU. rx(2) is to monitor the packets sent to CPU. both(3) is to monitor all packets sent from and to CPU. Some platforms do not support CPU mirror. Refer to CpuMirrorSupport in rmirrorCapabilities.
What is me1200RmirrorConfigSessionSourceCpuMirrorType?
This object specifies which direction of CPU traffic is mirrored for this session: none, tx (packets sent from the CPU), rx (packets sent to the CPU), or both, noting that some platforms don't support CPU mirroring at all per me1200RmirrorCapabilitiesCpuMirrorSupport. Admins use this to capture control-plane traffic for troubleshooting issues like unexpected CPU load or protocol packet drops. Setting me1200RmirrorConfigSessionSourceCpuMirrorType to both(3) would mirror all traffic flowing to and from the switch's own CPU for this session.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.3 snmpwalk -v2c -c public <target> ME1200-RMIRROR-MIB::me1200RmirrorConfigSessionSourceCpuMirrorType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.3.1 snmpget -v2c -c public <target> ME1200-RMIRROR-MIB::me1200RmirrorConfigSessionSourceCpuMirrorType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.3.1 s <value>
Start monitoring Cisco ME1200 Metro Ethernet switch (remote port mirroring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-RMIRROR-MIB::me1200RmirrorConfigSessionSourceCpuMirrorType OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (remote port mirroring) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.120 | me1200RmirrorMib | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1 | me1200RmirrorMibObjects | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1.2 | me1200RmirrorConfig | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.2 | me1200RmirrorConfigSessionSourceCpuTable | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1 | me1200RmirrorConfigSessionSourceCpuEntry | ME1200-RMIRROR-MIB |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.3 | me1200RmirrorConfigSessionSourceCpuMirrorType | ME1200-RMIRROR-MIB |