All MIBs › ME1200-MSTP-MIB › me1200MstpCistInterfaceParamBpduGuard
me1200MstpCistInterfaceParamBpduGuard
Module: ME1200-MSTP-MIB
OID (symbolic): ME1200-MSTP-MIB::me1200MstpCistInterfaceParamBpduGuard
OID (numeric): 1.3.6.1.4.1.9.9.815.1.20.1.2.4.1.8
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: If enabled, causes the port to disable itself upon receiving valid BPDU's. Contrary to the similar bridge setting, the port Edge status does not effect this setting. A port entering error-disabled state due to this setting is subject to the bridge ErrorRecoveryDelay setting as well
What is me1200MstpCistInterfaceParamBpduGuard?
When enabled, this causes the port to disable itself upon receiving any valid BPDU, regardless of whether the port is configured as Edge (unlike the bridge-wide BPDU guard setting), and a port disabled this way is still subject to the bridge's ErrorRecoveryDelay. An admin wanting BPDU guard protection on a specific port without needing to also mark it as an Edge port would enable this per-port setting directly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.20.1.2.4.1.8 snmpwalk -v2c -c public <target> ME1200-MSTP-MIB::me1200MstpCistInterfaceParamBpduGuard
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.20.1.2.4.1.8.1 snmpget -v2c -c public <target> ME1200-MSTP-MIB::me1200MstpCistInterfaceParamBpduGuard.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.20.1.2.4.1.8.1 s <value>
Start monitoring Cisco ME1200 Metro Ethernet access switch (802.1Q-2005 MSTP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-MSTP-MIB::me1200MstpCistInterfaceParamBpduGuard OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (802.1Q-2005 MSTP) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.20 | me1200MstpMib | ME1200-MSTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.20.1 | me1200Mstp | ME1200-MSTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.20.1.2 | me1200MstpConfig | ME1200-MSTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.20.1.2.4 | me1200MstpCistInterfaceParamTable | ME1200-MSTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.20.1.2.4.1 | me1200MstpCistInterfaceParamEntry | ME1200-MSTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.20.1.2.4.1.8 | me1200MstpCistInterfaceParamBpduGuard | ME1200-MSTP-MIB |