All MIBs › ME1200-LOOP-PROTECTION-MIB › me1200LoopProtectionInterfaceParamTransmit
me1200LoopProtectionInterfaceParamTransmit
Module: ME1200-LOOP-PROTECTION-MIB
OID (symbolic): ME1200-LOOP-PROTECTION-MIB::me1200LoopProtectionInterfaceParamTransmit
OID (numeric): 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.4
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Actively generate PDUs
What is me1200LoopProtectionInterfaceParamTransmit?
This read-write flag controls whether this port actively generates loop-detection PDUs, as opposed to only passively listening for loops. Admins enable this on ports where they want the device to actively probe for loops rather than rely solely on detecting another device's loop-detection traffic looping back. Setting me1200LoopProtectionInterfaceParamTransmit to true(1) on a port causes the device to send its own loop-detection frames out that port to actively test for a physical loop.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.4 snmpwalk -v2c -c public <target> ME1200-LOOP-PROTECTION-MIB::me1200LoopProtectionInterfaceParamTransmit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.4.1 snmpget -v2c -c public <target> ME1200-LOOP-PROTECTION-MIB::me1200LoopProtectionInterfaceParamTransmit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.4.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> me1200LoopProtectionInterfaceParamTransmit.1
Start monitoring Cisco ME1200 Metro Ethernet access switch (Layer 2 loop protection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-LOOP-PROTECTION-MIB::me1200LoopProtectionInterfaceParamTransmit OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (Layer 2 loop protection) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.91 | me1200LoopProtectionMib | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1 | me1200LoopProtectionObjects | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1.2 | me1200LoopProtectionConfig | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2 | me1200LoopProtectionConfigInterface | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1 | me1200LoopProtectionInterfaceParamTable | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1 | me1200LoopProtectionInterfaceParamEntry | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.4 | me1200LoopProtectionInterfaceParamTransmit | ME1200-LOOP-PROTECTION-MIB |