All MIBs › ME1200-LOOP-PROTECTION-MIB › me1200LoopProtectionGlobalsTransmitInterval
me1200LoopProtectionGlobalsTransmitInterval
Module: ME1200-LOOP-PROTECTION-MIB
OID (symbolic): ME1200-LOOP-PROTECTION-MIB::me1200LoopProtectionGlobalsTransmitInterval
OID (numeric): 1.3.6.1.4.1.9.9.815.1.91.1.2.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Port transmission interval (seconds). Valid range: 1-10 seconds.
What is me1200LoopProtectionGlobalsTransmitInterval?
This object sets how often, in seconds within a valid range of 1-10, the device transmits loop-detection PDUs on ports with loop protection enabled. Admins tune this to balance faster loop detection against added control-plane traffic. Setting me1200LoopProtectionGlobalsTransmitInterval to 3 would have the device send a loop-detection frame out protected ports every 3 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.91.1.2.1.2 snmpwalk -v2c -c public <target> ME1200-LOOP-PROTECTION-MIB::me1200LoopProtectionGlobalsTransmitInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.91.1.2.1.2.1 snmpget -v2c -c public <target> ME1200-LOOP-PROTECTION-MIB::me1200LoopProtectionGlobalsTransmitInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.91.1.2.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> me1200LoopProtectionGlobalsTransmitInterval.1
Start monitoring Cisco ME1200 Metro Ethernet access switch (Layer 2 loop protection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-LOOP-PROTECTION-MIB::me1200LoopProtectionGlobalsTransmitInterval OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (Layer 2 loop protection) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.91 | me1200LoopProtectionMib | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1 | me1200LoopProtectionObjects | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1.2 | me1200LoopProtectionConfig | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.1 | me1200LoopProtectionGlobals | ME1200-LOOP-PROTECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.1.2 | me1200LoopProtectionGlobalsTransmitInterval | ME1200-LOOP-PROTECTION-MIB |