ME1200-LLDPMED-MIB :: me1200LldpmedStatusRemoteDeviceInfoElinAddr

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ME1200-LLDPMED-MIB › me1200LldpmedStatusRemoteDeviceInfoElinAddr

me1200LldpmedStatusRemoteDeviceInfoElinAddr

Module: ME1200-LLDPMED-MIB

OID (symbolic): ME1200-LLDPMED-MIB::me1200LldpmedStatusRemoteDeviceInfoElinAddr

OID (numeric): 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12

Node type: OBJECT-TYPE

Type: ME1200DisplayString

Access: read-only

Description: Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This format consists of a numerical digit string, corresponding to the ELIN to be used for emergency calling. Maximum number of octets are 25.

What is me1200LldpmedStatusRemoteDeviceInfoElinAddr?

Reports the Emergency Location Identification Number (ELIN) the neighbor advertised, the digit string that would be used to route an emergency call from that endpoint to the correct PSAP.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12
snmpwalk -v2c -c public <target> ME1200-LLDPMED-MIB::me1200LldpmedStatusRemoteDeviceInfoElinAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12.1
snmpget -v2c -c public <target> ME1200-LLDPMED-MIB::me1200LldpmedStatusRemoteDeviceInfoElinAddr.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> me1200LldpmedStatusRemoteDeviceInfoElinAddr.1

Start monitoring Cisco ME1200 Metro Ethernet switch (LLDP-MED VoIP/location discovery) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-LLDPMED-MIB::me1200LldpmedStatusRemoteDeviceInfoElinAddr OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (LLDP-MED VoIP/location discovery) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.71me1200LldpmedMibME1200-LLDPMED-MIB
1.3.6.1.4.1.9.9.815.1.71.1me1200LldpmedMibObjectsME1200-LLDPMED-MIB
1.3.6.1.4.1.9.9.815.1.71.1.3me1200LldpmedStatusME1200-LLDPMED-MIB
1.3.6.1.4.1.9.9.815.1.71.1.3.3me1200LldpmedStatusRemoteDeviceInfoTableME1200-LLDPMED-MIB
1.3.6.1.4.1.9.9.815.1.71.1.3.3.1me1200LldpmedStatusRemoteDeviceInfoEntryME1200-LLDPMED-MIB
1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12me1200LldpmedStatusRemoteDeviceInfoElinAddrME1200-LLDPMED-MIB