All MIBs › ME1200-LLDPMED-MIB › me1200LldpmedConfigGlobalDatum
me1200LldpmedConfigGlobalDatum
Module: ME1200-LLDPMED-MIB
OID (symbolic): ME1200-LLDPMED-MIB::me1200LldpmedConfigGlobalDatum
OID (numeric): 1.3.6.1.4.1.9.9.815.1.71.1.2.1.7
Node type: OBJECT-TYPE
Type: ME1200lldpmedDatumType
Access: read-write
Description: Setting datum to configure the datum (geodetic system) to use.
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Prime Meridian Name: Greenwich.
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich;The associated vertical datum is the North American Vertical Datum of 1988 (NAVD88).This datum pair is to be used when referencing locations on land, not near tidal water(which would use Datum = NAD83/MLLW).
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich; The associated vertical datum is Mean Lower Low Water (MLLW). This datum pair is to be used when referencing locations on water/sea/ocean.
What is me1200LldpmedConfigGlobalDatum?
Selects the geodetic datum (WGS84, NAD83/NAVD88, or NAD83/MLLW) used to interpret the latitude/longitude/altitude coordinates advertised in the location TLV, with NAD83/MLLW reserved for coastal/tidal-water locations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.71.1.2.1.7 snmpwalk -v2c -c public <target> ME1200-LLDPMED-MIB::me1200LldpmedConfigGlobalDatum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.71.1.2.1.7.1 snmpget -v2c -c public <target> ME1200-LLDPMED-MIB::me1200LldpmedConfigGlobalDatum.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.71.1.2.1.7.1 s <value>
Start monitoring Cisco ME1200 Metro Ethernet switch (LLDP-MED VoIP/location discovery) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-LLDPMED-MIB::me1200LldpmedConfigGlobalDatum OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (LLDP-MED VoIP/location discovery) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.71 | me1200LldpmedMib | ME1200-LLDPMED-MIB |
| 1.3.6.1.4.1.9.9.815.1.71.1 | me1200LldpmedMibObjects | ME1200-LLDPMED-MIB |
| 1.3.6.1.4.1.9.9.815.1.71.1.2 | me1200LldpmedConfig | ME1200-LLDPMED-MIB |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1 | me1200LldpmedConfigGlobal | ME1200-LLDPMED-MIB |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1.7 | me1200LldpmedConfigGlobalDatum | ME1200-LLDPMED-MIB |