ME1200-IPMC-MVR-MIB :: me1200IpmcMvrInterfaceLastListenerQueryInterval

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsME1200-IPMC-MVR-MIBme1200IpmcMvrInterfaceLastListenerQueryInterval

me1200IpmcMvrInterfaceLastListenerQueryInterval

Module: ME1200-IPMC-MVR-MIB

OID (symbolic): ME1200-IPMC-MVR-MIB::me1200IpmcMvrInterfaceLastListenerQueryInterval

OID (numeric): 1.3.6.1.4.1.9.9.815.1.68.1.2.3.1.7

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This setting Last Listener/Member Query Interval is used to control IGMP protocol stack for fast aging mechanism. It defines the maximum time to wait for IGMP/MLD report memberships on a port before removing the port from multicast group membership. The value is in units of tenths of a seconds. The range is from 0 to 31744.

What is me1200IpmcMvrInterfaceLastListenerQueryInterval?

This sets, in tenths of a second (0-31744), the Last Listener/Member Query Interval — the maximum time the switch waits for an IGMP/MLD report after a leave before removing a port from a multicast group's membership. Admins lower this to make channel-change/leave detection faster, at the cost of sending more specific queries.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.68.1.2.3.1.7
snmpwalk -v2c -c public <target> ME1200-IPMC-MVR-MIB::me1200IpmcMvrInterfaceLastListenerQueryInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.68.1.2.3.1.7.1
snmpget -v2c -c public <target> ME1200-IPMC-MVR-MIB::me1200IpmcMvrInterfaceLastListenerQueryInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.68.1.2.3.1.7.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> me1200IpmcMvrInterfaceLastListenerQueryInterval.1

Start monitoring Cisco ME1200 Metro Ethernet switch (Multicast VLAN Registration/IPTV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-IPMC-MVR-MIB::me1200IpmcMvrInterfaceLastListenerQueryInterval OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (Multicast VLAN Registration/IPTV) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.68me1200IpmcMvrMibME1200-IPMC-MVR-MIB
1.3.6.1.4.1.9.9.815.1.68.1me1200IpmcMvrMIBObjectsME1200-IPMC-MVR-MIB
1.3.6.1.4.1.9.9.815.1.68.1.2me1200IpmcMvrConfigME1200-IPMC-MVR-MIB
1.3.6.1.4.1.9.9.815.1.68.1.2.3me1200IpmcMvrInterfaceTableME1200-IPMC-MVR-MIB
1.3.6.1.4.1.9.9.815.1.68.1.2.3.1me1200IpmcMvrInterfaceEntryME1200-IPMC-MVR-MIB
1.3.6.1.4.1.9.9.815.1.68.1.2.3.1.7me1200IpmcMvrInterfaceLastListenerQueryIntervalME1200-IPMC-MVR-MIB