All MIBs › ME1200-ERPS-MIB › me1200ErpsConfigRowEditorPort1SignalFailMepIndex
me1200ErpsConfigRowEditorPort1SignalFailMepIndex
Module: ME1200-ERPS-MIB
OID (symbolic): ME1200-ERPS-MIB::me1200ErpsConfigRowEditorPort1SignalFailMepIndex
OID (numeric): 1.3.6.1.4.1.9.9.815.1.72.1.2.2.9
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Index of SignalFail MEP for Port 1. Zero if not set. Must be zero for interconnected sub-rings.
What is me1200ErpsConfigRowEditorPort1SignalFailMepIndex?
This read-write staging field in the row editor mirrors me1200ErpsConfigPort1SignalFailMepIndex, setting the Signal Fail MEP index for port 1 on the staged ring group; it must be zero for interconnected sub-rings. An admin sets this while staging a major ring's second-port failure detection before committing the row.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.72.1.2.2.9 snmpwalk -v2c -c public <target> ME1200-ERPS-MIB::me1200ErpsConfigRowEditorPort1SignalFailMepIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.72.1.2.2.9.1 snmpget -v2c -c public <target> ME1200-ERPS-MIB::me1200ErpsConfigRowEditorPort1SignalFailMepIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.72.1.2.2.9.1 i <value>
Start monitoring Cisco ME1200 Metro Ethernet switch (G.8032 ring protection switching) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-ERPS-MIB::me1200ErpsConfigRowEditorPort1SignalFailMepIndex OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (G.8032 ring protection switching) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.72 | me1200ErpsMib | ME1200-ERPS-MIB |
| 1.3.6.1.4.1.9.9.815.1.72.1 | me1200ErpsMIBObjects | ME1200-ERPS-MIB |
| 1.3.6.1.4.1.9.9.815.1.72.1.2 | me1200ErpsConfig | ME1200-ERPS-MIB |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2 | me1200ErpsConfigRowEditor | ME1200-ERPS-MIB |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.9 | me1200ErpsConfigRowEditorPort1SignalFailMepIndex | ME1200-ERPS-MIB |