All MIBs › LX-10-MIB › faultDteDteLoopback
faultDteDteLoopback
Module: LX-10-MIB
OID (symbolic): LX-10-MIB::faultDteDteLoopback
OID (numeric): 1.3.6.1.4.1.135.22.3.2.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable/disable the managed node to perform loopback toward the customer equipment (DTE).
What is faultDteDteLoopback?
This enables or disables the managed node initiating a loopback toward the customer equipment (DTE). Admins enable this when they need to test the circuit from the device's own side out toward the customer's equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.135.22.3.2.6 snmpwalk -v2c -c public <target> LX-10-MIB::faultDteDteLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.135.22.3.2.6.1 snmpget -v2c -c public <target> LX-10-MIB::faultDteDteLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.135.22.3.2.6.1 i <value>
Start monitoring terminal/console servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LX-10-MIB::faultDteDteLoopback OID value, configure state conditions and alerts, and monitor any terminal/console servers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.135 | onstream | LX-10-MIB |
| 1.3.6.1.4.1.135.22 | lx_10 | LX-10-MIB |
| 1.3.6.1.4.1.135.22.3 | fault | LX-10-MIB |
| 1.3.6.1.4.1.135.22.3.2 | faultDte | LX-10-MIB |
| 1.3.6.1.4.1.135.22.3.2.6 | faultDteDteLoopback | LX-10-MIB |