All MIBs › LX-10-MIB › faultDs1LoopbackNetworkLoopback
faultDs1LoopbackNetworkLoopback
Module: LX-10-MIB
OID (symbolic): LX-10-MIB::faultDs1LoopbackNetworkLoopback
OID (numeric): 1.3.6.1.4.1.135.22.3.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: DS1 loopback is used to control the loopback state of one of the 7 DS1 interfaces in the managed node.
What is faultDs1LoopbackNetworkLoopback?
This controls the network-side loopback state of a specific DS1 interface: none, card (loop at the card level), or line (loop at the line level). Admins set this to card or line to isolate whether a suspected fault is inside the device or out on the physical line, as part of standard T1 troubleshooting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.135.22.3.1.1.1.2 snmpwalk -v2c -c public <target> LX-10-MIB::faultDs1LoopbackNetworkLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.135.22.3.1.1.1.2.1 snmpget -v2c -c public <target> LX-10-MIB::faultDs1LoopbackNetworkLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.135.22.3.1.1.1.2.1 i <value>
Start monitoring terminal/console servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LX-10-MIB::faultDs1LoopbackNetworkLoopback OID value, configure state conditions and alerts, and monitor any terminal/console servers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.135 | onstream | LX-10-MIB |
| 1.3.6.1.4.1.135.22 | lx_10 | LX-10-MIB |
| 1.3.6.1.4.1.135.22.3 | fault | LX-10-MIB |
| 1.3.6.1.4.1.135.22.3.1 | faultDs1 | LX-10-MIB |
| 1.3.6.1.4.1.135.22.3.1.1 | faultDs1LoopbackTable | LX-10-MIB |
| 1.3.6.1.4.1.135.22.3.1.1.1 | faultDs1LoopbackEntry | LX-10-MIB |
| 1.3.6.1.4.1.135.22.3.1.1.1.2 | faultDs1LoopbackNetworkLoopback | LX-10-MIB |