All MIBs › LX-10-MIB › configHsdpHoldoffSeconds
configHsdpHoldoffSeconds
Module: LX-10-MIB
OID (symbolic): LX-10-MIB::configHsdpHoldoffSeconds
OID (numeric): 1.3.6.1.4.1.135.22.2.5.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Hold-off time for CA lead. If the hold-off is set at 5 seconds, and if the CTS control is sensitive to no-bandwidth, the CTS line will go low after 5 seconds when no bandwidth is available. If the CTS control is sensitive to frequency-change, the CTS line will stay low for 5 seconds when there is a frequency change, and then back to high.
What is configHsdpHoldoffSeconds?
This sets the CTS hold-off time (1-5 seconds) used with configHsdpCtsControl: for no-bandwidth control, CTS drops after this many seconds without bandwidth; for frequency-change control, CTS stays low for this many seconds during a frequency change. Admins tune this delay to control how quickly (or gently) the DTE is signaled to pause during bandwidth or timing disruptions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.135.22.2.5.7 snmpwalk -v2c -c public <target> LX-10-MIB::configHsdpHoldoffSeconds
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.135.22.2.5.7.1 snmpget -v2c -c public <target> LX-10-MIB::configHsdpHoldoffSeconds.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.135.22.2.5.7.1 i <value>
Start monitoring terminal/console servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LX-10-MIB::configHsdpHoldoffSeconds OID value, configure state conditions and alerts, and monitor any terminal/console servers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.135 | onstream | LX-10-MIB |
| 1.3.6.1.4.1.135.22 | lx_10 | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2 | config | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.5 | configHsdp | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.5.7 | configHsdpHoldoffSeconds | LX-10-MIB |