All MIBs › LX-10-MIB › configHdlcLocalPort
configHdlcLocalPort
Module: LX-10-MIB
OID (symbolic): LX-10-MIB::configHdlcLocalPort
OID (numeric): 1.3.6.1.4.1.135.22.2.6.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Assign one of the DS1 ports as the HDLC port. If its value is 0, no port is asssigned as the HDLC port.
What is configHdlcLocalPort?
This assigns which DS1 port (0-7) on this unit is used as the HDLC management channel port; 0 means no port is assigned. Admins set this when configHdlcMode is manual, to designate which T1/E1 line should also carry the inter-unit HDLC control traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.135.22.2.6.2 snmpwalk -v2c -c public <target> LX-10-MIB::configHdlcLocalPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.135.22.2.6.2.1 snmpget -v2c -c public <target> LX-10-MIB::configHdlcLocalPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.135.22.2.6.2.1 i <value>
Start monitoring terminal/console servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LX-10-MIB::configHdlcLocalPort OID value, configure state conditions and alerts, and monitor any terminal/console servers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.135 | onstream | LX-10-MIB |
| 1.3.6.1.4.1.135.22 | lx_10 | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2 | config | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.6 | configHdlc | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.6.2 | configHdlcLocalPort | LX-10-MIB |