All MIBs › LX-10-MIB › configDs1LBO
configDs1LBO
Module: LX-10-MIB
OID (symbolic): LX-10-MIB::configDs1LBO
OID (numeric): 1.3.6.1.4.1.135.22.2.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: LBO. This object is not accessible if the managed node is the E1 version of LX10.
What is configDs1LBO?
This sets the line build-out attenuation for a DS1 port - 0 dB, -7.5 dB, or -15 dB - and is not accessible on the E1 version of the LX-10. Admins adjust this to match the cable run length to the far-end equipment, reducing signal reflection on shorter runs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.135.22.2.1.1.4 snmpwalk -v2c -c public <target> LX-10-MIB::configDs1LBO
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.135.22.2.1.1.4.1 snmpget -v2c -c public <target> LX-10-MIB::configDs1LBO.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.135.22.2.1.1.4.1 i <value>
Start monitoring terminal/console servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LX-10-MIB::configDs1LBO OID value, configure state conditions and alerts, and monitor any terminal/console servers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.135 | onstream | LX-10-MIB |
| 1.3.6.1.4.1.135.22 | lx_10 | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2 | config | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.1 | configDs1Table | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.1.1 | configDs1Entry | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.1.1.4 | configDs1LBO | LX-10-MIB |