All MIBs › LX-10-MIB › configDs1Framing
configDs1Framing
Module: LX-10-MIB
OID (symbolic): LX-10-MIB::configDs1Framing
OID (numeric): 1.3.6.1.4.1.135.22.2.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Framing format. This object is not accessible if the managed node is the E1 version of LX10.
What is configDs1Framing?
This sets the framing format for a DS1 port, either esf or d4, and is not accessible on the E1 version of the LX-10. Admins must match this to the carrier's or far-end device's framing format, as a mismatch here is a common cause of T1 line alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.135.22.2.1.1.6 snmpwalk -v2c -c public <target> LX-10-MIB::configDs1Framing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.135.22.2.1.1.6.1 snmpget -v2c -c public <target> LX-10-MIB::configDs1Framing.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.135.22.2.1.1.6.1 i <value>
Start monitoring terminal/console servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LX-10-MIB::configDs1Framing OID value, configure state conditions and alerts, and monitor any terminal/console servers from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.135 | onstream | LX-10-MIB |
| 1.3.6.1.4.1.135.22 | lx_10 | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2 | config | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.1 | configDs1Table | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.1.1 | configDs1Entry | LX-10-MIB |
| 1.3.6.1.4.1.135.22.2.1.1.6 | configDs1Framing | LX-10-MIB |