All MIBs › LIEBERT-SITENET-INTEGRATOR-MIB › envRelay1Control
envRelay1Control
Module: LIEBERT-SITENET-INTEGRATOR-MIB
OID (symbolic): LIEBERT-SITENET-INTEGRATOR-MIB::envRelay1Control
OID (numeric): 1.3.6.1.4.1.476.1.2.1.1.1.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If Control value is 0 then this output may be directly controlled by the SNMP Manager. When Control contains any of the following values, or a value resulting from the sum of any of these values the Agent will activate the output when the any of the associated conditions is sensed and de-activate the output when all conditions clear.
DigitalInput1State true(1) 1 DigitalInput2State true(1) 2 DigitalInput3State true(1) 4 DigitalInput4State true(1) 8 DigitalInput5State true(1) 16 DigitalInput6State true(1) 32 DigitalInput7State true(1) 64 DigitalInput8State true(1) 128 DigitalInput9State true(1) 256 DigitalInput10State true(1) 512 Temperature1 above HighLimit 1024 Temperature1 below LowLimit 2048 Temperature2 above HighLimit 4096 Temperature2 below LowLimit 8192 Temperature3 above HighLimit 16384 Temperature3 below LowLimit 32768 Humidity1 above HighLimit 65536 Humidity1 below LowLimit 131072 Humidity2 above HighLimit 262144 Humidity2 below LowLimit 524288
The Control variable is stored in non-volatile memory.
What is envRelay1Control?
Sets Relay 1 to either direct manual control (value 0, driven by envRelay1State) or automatic activation based on a bitmask of alarm conditions, such as any digital input going true or a temperature/humidity sensor crossing a high or low limit, summed from the documented per-condition bit values. An administrator configures this so the relay automatically triggers, for example, when Temperature Sensor 1 exceeds its high limit, by writing the corresponding bit value (1024) into Control.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.476.1.2.1.1.1.3.1.3 snmpwalk -v2c -c public <target> LIEBERT-SITENET-INTEGRATOR-MIB::envRelay1Control
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.476.1.2.1.1.1.3.1.3.1 snmpget -v2c -c public <target> LIEBERT-SITENET-INTEGRATOR-MIB::envRelay1Control.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.476.1.2.1.1.1.3.1.3.1 i <value>
Start monitoring Liebert (Emerson/Vertiv) SiteNet Integrator environmental monitoring unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LIEBERT-SITENET-INTEGRATOR-MIB::envRelay1Control OID value, configure state conditions and alerts, and monitor any Liebert (Emerson/Vertiv) SiteNet Integrator environmental monitoring unit from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.476 | emerson | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1 | liebertCorp | LIEBERT-GP-REGISTRATION-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.476.1.2 | liebertEnvironment | LIEBERT-SITENET-INTEGRATOR-MIB |
| 1.3.6.1.4.1.476.1.2.1 | leExtensions | LIEBERT-SITENET-INTEGRATOR-MIB |
| 1.3.6.1.4.1.476.1.2.1.1 | leSiteNet01 | LIEBERT-SITENET-INTEGRATOR-MIB |
| 1.3.6.1.4.1.476.1.2.1.1.1 | envMIB | LIEBERT-SITENET-INTEGRATOR-MIB |
| 1.3.6.1.4.1.476.1.2.1.1.1.3 | envRelays | LIEBERT-SITENET-INTEGRATOR-MIB |
| 1.3.6.1.4.1.476.1.2.1.1.1.3.1 | envRelay1 | LIEBERT-SITENET-INTEGRATOR-MIB |
| 1.3.6.1.4.1.476.1.2.1.1.1.3.1.3 | envRelay1Control | LIEBERT-SITENET-INTEGRATOR-MIB |