All MIBs › LANPLEX-SYSTEMS-MIB-1-2-2 › lpsTokenRingPortRingStatus
lpsTokenRingPortRingStatus
Module: LANPLEX-SYSTEMS-MIB-1-2-2
OID (symbolic): LANPLEX-SYSTEMS-MIB-1-2-2::lpsTokenRingPortRingStatus
OID (numeric): 1.3.6.1.4.1.114.1.4.13.2.1.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current interface status which can be used to diagnose fluctuating problems that can occur on token rings, after a station has successfully been added to the ring. Before an open is completed, this object has the value for the 'no status' condition. This object is useful for debugging problems when the station can not even enter the ring. The object's value is a sum of values, one for each currently applicable condition. The following values are defined for various conditions: 0 = No Problems detected 32 = Ring Recovery 64 = Single Station 256 = Remove Received 512 = reserved 1024 = Auto-Removal Error 2048 = Lobe Wire Fault 4096 = Transmit Beacon 8192 = Soft Error 16384 = Hard Error 32768 = Signal Loss 131072 = no status, open not completed.
What is lpsTokenRingPortRingStatus?
A bitmask of currently active ring conditions for this interface, useful for diagnosing intermittent problems even before the port has successfully opened onto the ring; defined bits include Ring Recovery (32), Single Station (64), Remove Received (256), Auto-Removal Error (1024), Lobe Wire Fault (2048), Transmit Beacon (4096), Soft Error (8192), Hard Error (16384), Signal Loss (32768), and No Status/open-not-completed (131072), with 0 meaning no problems. An admin decodes this bitmask to quickly identify which specific fault (e.g. a lobe wire fault vs. signal loss) is preventing a station from joining the ring.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.114.1.4.13.2.1.24 snmpwalk -v2c -c public <target> LANPLEX-SYSTEMS-MIB-1-2-2::lpsTokenRingPortRingStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.114.1.4.13.2.1.24.1 snmpget -v2c -c public <target> LANPLEX-SYSTEMS-MIB-1-2-2::lpsTokenRingPortRingStatus.1
Start monitoring SynOptics/Bay Networks LANplex modular LAN switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LANPLEX-SYSTEMS-MIB-1-2-2::lpsTokenRingPortRingStatus OID value, configure state conditions and alerts, and monitor any SynOptics/Bay Networks LANplex modular LAN switch from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.114 | synernetics | A3Com-products-MIB |
| 1.3.6.1.4.1.114.1 | lanplex | A3Com-products-MIB |
| 1.3.6.1.4.1.114.1.4 | lanplexSystemsMib | A3Com-products-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.114.1.4.13 | lpsTokenRingPort | LANPLEX-SYSTEMS-MIB-1-2-2 |
| 1.3.6.1.4.1.114.1.4.13.2 | lpsTokenRingPortTable | LANPLEX-SYSTEMS-MIB-1-2-2 |
| 1.3.6.1.4.1.114.1.4.13.2.1 | lpsTokenRingPortEntry | LANPLEX-SYSTEMS-MIB-1-2-2 |
| 1.3.6.1.4.1.114.1.4.13.2.1.24 | lpsTokenRingPortRingStatus | LANPLEX-SYSTEMS-MIB-1-2-2 |