LANPLEX-SYSTEMS-MIB-1-2-2 :: lpsSnmpInternalAgentTrapDestinationMask

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › LANPLEX-SYSTEMS-MIB-1-2-2 › lpsSnmpInternalAgentTrapDestinationMask

lpsSnmpInternalAgentTrapDestinationMask

Module: LANPLEX-SYSTEMS-MIB-1-2-2

OID (symbolic): LANPLEX-SYSTEMS-MIB-1-2-2::lpsSnmpInternalAgentTrapDestinationMask

OID (numeric): 1.3.6.1.4.1.114.1.4.5.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: A value which indicates to which other agents in the system traps should be sent. The value is a sum. It initially takes on the value 0, then for each agent which is to receive traps, 2 raised to the value of (lpsSnmpAgentId - 1) for that agent is added to the sum. Note that only traps which are enabled according to the value of the lpsSnmpInternalAgentTrapMask object will be forwarded, and that each trap which is forwarded will be transmitted to each agent identified by this mask.

What is lpsSnmpInternalAgentTrapDestinationMask?

A bitmask selecting which other agents in the chassis should receive this agent's traps, built by adding 2^(agentId-1) for each destination agent. Only traps that are also enabled in lpsSnmpInternalAgentTrapMask are actually forwarded to the agents identified here.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.114.1.4.5.3
snmpwalk -v2c -c public <target> LANPLEX-SYSTEMS-MIB-1-2-2::lpsSnmpInternalAgentTrapDestinationMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.114.1.4.5.3.1
snmpget -v2c -c public <target> LANPLEX-SYSTEMS-MIB-1-2-2::lpsSnmpInternalAgentTrapDestinationMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.114.1.4.5.3.1 i <value>

Start monitoring SynOptics/Bay Networks LANplex modular LAN switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LANPLEX-SYSTEMS-MIB-1-2-2::lpsSnmpInternalAgentTrapDestinationMask OID value, configure state conditions and alerts, and monitor any SynOptics/Bay Networks LANplex modular LAN switch from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.114synerneticsA3Com-products-MIB
1.3.6.1.4.1.114.1lanplexA3Com-products-MIB
1.3.6.1.4.1.114.1.4lanplexSystemsMibA3Com-products-MIB
Numeric OIDNameModule
1.3.6.1.4.1.114.1.4.5lpsSnmpLANPLEX-SYSTEMS-MIB-1-2-2
1.3.6.1.4.1.114.1.4.5.3lpsSnmpInternalAgentTrapDestinationMaskLANPLEX-SYSTEMS-MIB-1-2-2