All MIBs › LANPLEX-SYSTEMS-MIB-1-2-2 › lpsNetworkAnalyzerStatus
lpsNetworkAnalyzerStatus
Module: LANPLEX-SYSTEMS-MIB-1-2-2
OID (symbolic): LANPLEX-SYSTEMS-MIB-1-2-2::lpsNetworkAnalyzerStatus
OID (numeric): 1.3.6.1.4.1.114.1.4.12.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of the entry. Setting the value of a non-existent instance of this object to valid(1) attempts to add the corresponding entry to the table. The effect of adding an entry to the table is to configure the port for monitoring and to disable it for switching. Setting an existing instance of this object to invalid(2) attempts to remove the corresponding entry from the table. The effect of removing an entry from the table is to disable the port for monitoring and to make available for switching.
What is lpsNetworkAnalyzerStatus?
Controls whether an analyzer entry exists: setting a new instance to valid(1) adds it, configuring that port for monitoring and disabling it for normal switching, while setting an existing instance to invalid(2) removes it and returns the port to switching. An admin uses this to turn a spare port into a dedicated protocol-analyzer tap, and to release it back to normal service afterward.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.114.1.4.12.1.1.4 snmpwalk -v2c -c public <target> LANPLEX-SYSTEMS-MIB-1-2-2::lpsNetworkAnalyzerStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.114.1.4.12.1.1.4.1 snmpget -v2c -c public <target> LANPLEX-SYSTEMS-MIB-1-2-2::lpsNetworkAnalyzerStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.114.1.4.12.1.1.4.1 i <value>
Start monitoring SynOptics/Bay Networks LANplex modular LAN switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LANPLEX-SYSTEMS-MIB-1-2-2::lpsNetworkAnalyzerStatus OID value, configure state conditions and alerts, and monitor any SynOptics/Bay Networks LANplex modular LAN switch from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.114 | synernetics | A3Com-products-MIB |
| 1.3.6.1.4.1.114.1 | lanplex | A3Com-products-MIB |
| 1.3.6.1.4.1.114.1.4 | lanplexSystemsMib | A3Com-products-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.114.1.4.12 | lpsNetworkMonitor | LANPLEX-SYSTEMS-MIB-1-2-2 |
| 1.3.6.1.4.1.114.1.4.12.1 | lpsNetworkAnalyzerTable | LANPLEX-SYSTEMS-MIB-1-2-2 |
| 1.3.6.1.4.1.114.1.4.12.1.1 | lpsNetworkAnalyzerTableEntry | LANPLEX-SYSTEMS-MIB-1-2-2 |
| 1.3.6.1.4.1.114.1.4.12.1.1.4 | lpsNetworkAnalyzerStatus | LANPLEX-SYSTEMS-MIB-1-2-2 |