LANPLEX-SYSTEMS-MIB-1-2-2 :: lpsBridgeBackbonePort

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › LANPLEX-SYSTEMS-MIB-1-2-2 › lpsBridgeBackbonePort

lpsBridgeBackbonePort

Module: LANPLEX-SYSTEMS-MIB-1-2-2

OID (symbolic): LANPLEX-SYSTEMS-MIB-1-2-2::lpsBridgeBackbonePort

OID (numeric): 1.3.6.1.4.1.114.1.4.10.2.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The number of the port selected as the backbone segment port when the corresponding value of lpsBridgeMode is is expressMode(1). The value of this object can range from 1 to the corresponding value of lpsBridgePortCount, however, some bridges may support only a subset of ports as backbone ports. If the corresponding value of lpsBridgeMode is not expressMode(1), the value of this object is ignored.

What is lpsBridgeBackbonePort?

Selects which port number, from 1 to lpsBridgePortCount, acts as the backbone segment port when the bridge is in expressMode(1); the value is ignored in any other bridge mode. An admin sets this to designate the uplink port that carries traffic to/from the rest of the network in express-mode bridging.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.114.1.4.10.2.1.8
snmpwalk -v2c -c public <target> LANPLEX-SYSTEMS-MIB-1-2-2::lpsBridgeBackbonePort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.114.1.4.10.2.1.8.1
snmpget -v2c -c public <target> LANPLEX-SYSTEMS-MIB-1-2-2::lpsBridgeBackbonePort.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.114.1.4.10.2.1.8.1 i <value>

Start monitoring SynOptics/Bay Networks LANplex modular LAN switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LANPLEX-SYSTEMS-MIB-1-2-2::lpsBridgeBackbonePort OID value, configure state conditions and alerts, and monitor any SynOptics/Bay Networks LANplex modular LAN switch from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.114synerneticsA3Com-products-MIB
1.3.6.1.4.1.114.1lanplexA3Com-products-MIB
1.3.6.1.4.1.114.1.4lanplexSystemsMibA3Com-products-MIB
Numeric OIDNameModule
1.3.6.1.4.1.114.1.4.10lpsBridgeLANPLEX-SYSTEMS-MIB-1-2-2
1.3.6.1.4.1.114.1.4.10.2lpsBridgeTableLANPLEX-SYSTEMS-MIB-1-2-2
1.3.6.1.4.1.114.1.4.10.2.1lpsBridgeEntryLANPLEX-SYSTEMS-MIB-1-2-2
1.3.6.1.4.1.114.1.4.10.2.1.8lpsBridgeBackbonePortLANPLEX-SYSTEMS-MIB-1-2-2