All MIBs › Juniper-UNI-SONET-MIB › juniSonetMediumLoopbackConfig
juniSonetMediumLoopbackConfig
Module: Juniper-UNI-SONET-MIB
OID (symbolic): Juniper-UNI-SONET-MIB::juniSonetMediumLoopbackConfig
OID (numeric): 1.3.6.1.4.1.4874.2.2.7.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The current loopback state of the SONET/SDH interface. The values mean: sonetNoLoop Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. sonetFacilityLoop The received signal at this interface is looped back out through the corresponding transmitter in the return direction. sonetTerminalLoop The signal that is about to be transmitted is connected to the associated incoming receiver. sonetOtherLoop Loopbacks that are not defined here.
What is juniSonetMediumLoopbackConfig?
Sets the loopback state of a SONET/SDH interface: sonetNoLoop (normal operation), sonetFacilityLoop (loops the received signal back out the transmitter), sonetTerminalLoop (loops the outgoing signal back to the local receiver), or sonetOtherLoop. An admin uses facility or terminal loopback to isolate whether a fault is local or on the far end of the circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.7.1.1.1.2 snmpwalk -v2c -c public <target> Juniper-UNI-SONET-MIB::juniSonetMediumLoopbackConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.7.1.1.1.2.1 snmpget -v2c -c public <target> Juniper-UNI-SONET-MIB::juniSonetMediumLoopbackConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.7.1.1.1.2.1 i <value>
Start monitoring Juniper Networks E-series router with SONET/SDH interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-UNI-SONET-MIB::juniSonetMediumLoopbackConfig OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series router with SONET/SDH interfaces from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.7 | juniSonetMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.7.1 | juniSonetObjects | Juniper-UNI-SONET-MIB |
| 1.3.6.1.4.1.4874.2.2.7.1.1 | juniSonetMediumTable | Juniper-UNI-SONET-MIB |
| 1.3.6.1.4.1.4874.2.2.7.1.1.1 | juniSonetMediumEntry | Juniper-UNI-SONET-MIB |
| 1.3.6.1.4.1.4874.2.2.7.1.1.1.2 | juniSonetMediumLoopbackConfig | Juniper-UNI-SONET-MIB |