Juniper-RADIUS-CLIENT-MIB :: juniRadiusClientCallingStationIdFormat

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Juniper-RADIUS-CLIENT-MIB › juniRadiusClientCallingStationIdFormat

juniRadiusClientCallingStationIdFormat

Module: Juniper-RADIUS-CLIENT-MIB

OID (symbolic): Juniper-RADIUS-CLIENT-MIB::juniRadiusClientCallingStationIdFormat

OID (numeric): 1.3.6.1.4.1.4874.2.2.19.1.1.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The format used by the client for the Calling-Station-ID attribute (attribute number 31): delimited In the Calling-Station-ID attribute (attribute 31) use the format ' '. fixedFomat In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of port, 3 digits of VPI, followed by 5 digits of VCI. fixedFormatAdapterEmbedded In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 1 digit of slot, 1 digit of adapter, 1 digit of port, 3 digits of VPI, followed by 5 digits of VCI. fixedFormatAdapterNewField In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of adapter, 2 digits of port, 3 digits of VPI, followed by 5 digits of VCI. fixedFormatStacked In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of port, 4 digits of SVLAN ID and 4 digits of VLAN ID only in the case of Ethernet fixedFormatAdapterEmbeddedStacked In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 1 digit of slot, 1 digit of adapter, 1 digit of port, 4 digits of SVLAN ID and 4 digits of VLAN ID only in the case of Ethernet fixedFormatAdapterNewFieldStacked In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of adapter, 2 digits of port, 4 digits of SVLAN ID and 4 digits of VLAN ID only in the case of Ethernet

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.15
snmpwalk -v2c -c public <target> Juniper-RADIUS-CLIENT-MIB::juniRadiusClientCallingStationIdFormat

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.19.1.1.15.1
snmpget -v2c -c public <target> Juniper-RADIUS-CLIENT-MIB::juniRadiusClientCallingStationIdFormat.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.19.1.1.15.1 i <value>

Start monitoring Juniper Networks E-series (ERX) edge router (RADIUS client configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-RADIUS-CLIENT-MIB::juniRadiusClientCallingStationIdFormat OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series (ERX) edge router (RADIUS client configuration) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.19juniRadiusClientMIBJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.19.1juniRadiusClientObjectsJuniper-RADIUS-CLIENT-MIB
1.3.6.1.4.1.4874.2.2.19.1.1juniRadiusGeneralClientJuniper-RADIUS-CLIENT-MIB
1.3.6.1.4.1.4874.2.2.19.1.1.15juniRadiusClientCallingStationIdFormatJuniper-RADIUS-CLIENT-MIB

Also defined in

Module

This MIB depends on