All MIBs › Juniper-MPLS-MIB › juniMplsGroupTopologyDrivenLdp
juniMplsGroupTopologyDrivenLdp
Module: Juniper-MPLS-MIB
OID (symbolic): Juniper-MPLS-MIB::juniMplsGroupTopologyDrivenLdp
OID (numeric): 1.3.6.1.4.1.4874.2.2.54.1.1.1.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: LDP is used for label distributions control for setting up the LSPs. Topology driven LSPs also setup using LDP label distribution control. This object allows to enable/disable LDP admin state used for topology driven LSPs setup.
What is juniMplsGroupTopologyDrivenLdp?
Enables or disables (default disable) the LDP admin state used specifically for topology-driven LSP setup, as opposed to LDP used for statically configured tunnels. An admin turns this on to let LDP automatically build LSPs following the routed topology rather than manual tunnel definitions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.24 snmpwalk -v2c -c public <target> Juniper-MPLS-MIB::juniMplsGroupTopologyDrivenLdp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.24.1 snmpget -v2c -c public <target> Juniper-MPLS-MIB::juniMplsGroupTopologyDrivenLdp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.24.1 i <value>
Start monitoring Juniper E-series router (ERX/ES2, JUNOSe) — MPLS LSP/tunnel/VPN configuration with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-MPLS-MIB::juniMplsGroupTopologyDrivenLdp OID value, configure state conditions and alerts, and monitor any Juniper E-series router (ERX/ES2, JUNOSe) — MPLS LSP/tunnel/VPN configuration from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.54 | juniMplsMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.54.1 | juniMplsObjects | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1 | juniMplsLsrGlobalConfig | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1 | juniMplsGroup | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.24 | juniMplsGroupTopologyDrivenLdp | Juniper-MPLS-MIB |