All MIBs › Juniper-MPLS-MIB › juniMplsGroupLdpRetryIntervalNoroute
juniMplsGroupLdpRetryIntervalNoroute
Module: Juniper-MPLS-MIB
OID (symbolic): Juniper-MPLS-MIB::juniMplsGroupLdpRetryIntervalNoroute
OID (numeric): 1.3.6.1.4.1.4874.2.2.54.1.1.1.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Use this object to configure the time interval between two successive LSP setup retries by LDP after a failure due to no available route.
What is juniMplsGroupLdpRetryIntervalNoroute?
An obsolete object that used to configure the interval in seconds (0-60, default 30) between LDP-specific LSP retries after a no-route failure. It's marked obsolete in this MIB revision, superseded by the general LSP retry-interval objects.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.10 snmpwalk -v2c -c public <target> Juniper-MPLS-MIB::juniMplsGroupLdpRetryIntervalNoroute
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.10.1 snmpget -v2c -c public <target> Juniper-MPLS-MIB::juniMplsGroupLdpRetryIntervalNoroute.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.54.1.1.1.10.1 i <value>
Start monitoring Juniper E-series router (ERX/ES2, JUNOSe) — MPLS LSP/tunnel/VPN configuration with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-MPLS-MIB::juniMplsGroupLdpRetryIntervalNoroute OID value, configure state conditions and alerts, and monitor any Juniper E-series router (ERX/ES2, JUNOSe) — MPLS LSP/tunnel/VPN configuration from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.54 | juniMplsMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.54.1 | juniMplsObjects | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1 | juniMplsLsrGlobalConfig | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1 | juniMplsGroup | Juniper-MPLS-MIB |
| 1.3.6.1.4.1.4874.2.2.54.1.1.1.10 | juniMplsGroupLdpRetryIntervalNoroute | Juniper-MPLS-MIB |