All MIBs › Juniper-L2TP-MIB › juniL2tpSysConfigReceiveDataSequencingIgnore
juniL2tpSysConfigReceiveDataSequencingIgnore
Module: Juniper-L2TP-MIB
OID (symbolic): Juniper-L2TP-MIB::juniL2tpSysConfigReceiveDataSequencingIgnore
OID (numeric): 1.3.6.1.4.1.4874.2.2.35.1.1.1.7
Node type: OBJECT-TYPE
Type: JuniEnable
Access: read-write
Description: Enable/disable ignoring of receive sequencing of L2TP data packets.
What is juniL2tpSysConfigReceiveDataSequencingIgnore?
Read-write switch that tells the router to ignore the sequence numbers on incoming L2TP data (payload) packets rather than enforcing in-order delivery/reordering. Enabling it can reduce processing overhead on high-throughput tunnels at the cost of losing the protocol's built-in reordering/loss-detection behavior for data traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.1.1.7 snmpwalk -v2c -c public <target> Juniper-L2TP-MIB::juniL2tpSysConfigReceiveDataSequencingIgnore
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.1.1.7.1 snmpget -v2c -c public <target> Juniper-L2TP-MIB::juniL2tpSysConfigReceiveDataSequencingIgnore.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.35.1.1.1.7.1 s <value>
Start monitoring Juniper Networks E-series broadband services router (L2TP tunnel termination) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-L2TP-MIB::juniL2tpSysConfigReceiveDataSequencingIgnore OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series broadband services router (L2TP tunnel termination) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.35 | juniL2tpMIB | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1 | juniL2tpObjects | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.1 | juniL2tpSystem | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1 | juniL2tpSystemConfig | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.7 | juniL2tpSysConfigReceiveDataSequencingIgnore | Juniper-L2TP-MIB |