All MIBs › Juniper-L2TP-MIB › juniL2tpSysConfigControlRetransmissions
juniL2tpSysConfigControlRetransmissions
Module: Juniper-L2TP-MIB
OID (symbolic): Juniper-L2TP-MIB::juniL2tpSysConfigControlRetransmissions
OID (numeric): 1.3.6.1.4.1.4874.2.2.35.1.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The number of retransmission retries allowed before control connection goes down.
This object has been replaced by juniL2tpSysConfigControlRetransmissionsEstablished and juniL2tpSysConfigControlRetransmissionsNotEstablished.
What is juniL2tpSysConfigControlRetransmissions?
Deprecated read-write knob (2-7) that used to set how many times an unacknowledged L2TP control message is retransmitted before the control connection is declared down. It has been superseded by the separate juniL2tpSysConfigControlRetransmissionsEstablished and juniL2tpSysConfigControlRetransmissionsNotEstablished objects, which apply different retry counts depending on whether the tunnel is already established.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.1.1.5 snmpwalk -v2c -c public <target> Juniper-L2TP-MIB::juniL2tpSysConfigControlRetransmissions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.35.1.1.1.5.1 snmpget -v2c -c public <target> Juniper-L2TP-MIB::juniL2tpSysConfigControlRetransmissions.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.35.1.1.1.5.1 i <value>
Start monitoring Juniper Networks E-series broadband services router (L2TP tunnel termination) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-L2TP-MIB::juniL2tpSysConfigControlRetransmissions OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series broadband services router (L2TP tunnel termination) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.35 | juniL2tpMIB | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1 | juniL2tpObjects | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.1 | juniL2tpSystem | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1 | juniL2tpSystemConfig | Juniper-L2TP-MIB |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.5 | juniL2tpSysConfigControlRetransmissions | Juniper-L2TP-MIB |