All MIBs › Juniper-FRAME-RELAY-MIB › juniFrDlcmiErrorThreshold
juniFrDlcmiErrorThreshold
Module: Juniper-FRAME-RELAY-MIB
OID (symbolic): Juniper-FRAME-RELAY-MIB::juniFrDlcmiErrorThreshold
OID (numeric): 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: The minimum number of errors that must be observed within the number of events specified by juniFrDlcmiMonitoredEvents, to declare the interface down.
'error' is lack of receipt of a Status, in response to an issued Status Enquiry, within the Polling Interval (T391).
Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI.
What is juniFrDlcmiErrorThreshold?
Sets the minimum number of polling errors (1-10, default 3) that must occur within juniFrDlcmiMonitoredEvents polling intervals before this DTE/NNI interface declares itself down, corresponding to counter N392. A missed status reply within the polling interval (T391) counts as one error.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.10 | juniFrameRelayMIB | Juniper-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.4874.2.2.10.1 | juniFrObjects | Juniper-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.4874.2.2.10.1.1 | juniFrIfLayer | Juniper-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2 | juniFrDlcmiTable | Juniper-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1 | juniFrDlcmiEntry | Juniper-FRAME-RELAY-MIB |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.7 | juniFrDlcmiErrorThreshold | Juniper-FRAME-RELAY-MIB |