All MIBs › Juniper-BGP-MIB › juniBgpUnconfiguredAttributes
juniBgpUnconfiguredAttributes
Module: Juniper-BGP-MIB
OID (symbolic): Juniper-BGP-MIB::juniBgpUnconfiguredAttributes
OID (numeric): 1.3.6.1.4.1.4874.2.2.29.1.1.33
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value).
Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured.
On write each bit indicates whether or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state.
Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.29.1.1.33 snmpwalk -v2c -c public <target> Juniper-BGP-MIB::juniBgpUnconfiguredAttributes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.29.1.1.33.1 snmpget -v2c -c public <target> Juniper-BGP-MIB::juniBgpUnconfiguredAttributes.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.29.1.1.33.1 s <value>
Start monitoring Juniper E-series router (BGP configuration/peer sessions/route stats) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-BGP-MIB::juniBgpUnconfiguredAttributes OID value, configure state conditions and alerts, and monitor any Juniper E-series router (BGP configuration/peer sessions/route stats) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.29 | juniBgpMIB | Juniper-BGP-MIB |
| 1.3.6.1.4.1.4874.2.2.29.1 | juniBgpObjects | Juniper-BGP-MIB |
| 1.3.6.1.4.1.4874.2.2.29.1.1 | juniBgpGeneralGroup | Juniper-BGP-MIB |
| 1.3.6.1.4.1.4874.2.2.29.1.1.33 | juniBgpUnconfiguredAttributes | Juniper-BGP-MIB |