All MIBs › Juniper-ATM-1483-Profile-MIB › juniAtm1483ProfileSetMap
juniAtm1483ProfileSetMap
Module: Juniper-ATM-1483-Profile-MIB
OID (symbolic): Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileSetMap
OID (numeric): 1.3.6.1.4.1.4874.2.2.58.1.1.1.1.2
Node type: OBJECT-TYPE
Type: JuniSetMap
Access: read-write
Description: A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use.
The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set).
When a SET request does not explicitly configure JuniSetMap, bits in JuniSetMap are set as a side-effect of configuring other profile attributes in the same entry.
If, however, a SET request explicitly configures JuniSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur.
Once set, bits can only be cleared by explicitly configuring JuniSetMap.
What is juniAtm1483ProfileSetMap?
A bitmap tracking which attributes in this ATM 1483 profile entry have been explicitly configured versus left at defaults; explicitly setting this bitmap overrides both prior bit settings and any simultaneous side-effect settings from other attribute changes. An admin normally lets the device manage this automatically and would only set it directly to force a specific set of attributes to be marked as explicitly configured.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.58.1.1.1.1.2 snmpwalk -v2c -c public <target> Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileSetMap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.58.1.1.1.1.2.1 snmpget -v2c -c public <target> Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileSetMap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.58.1.1.1.1.2.1 s <value>
Start monitoring Juniper Networks E-series (JUNOSe) router (ATM RFC 1483/2684 profiles) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileSetMap OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series (JUNOSe) router (ATM RFC 1483/2684 profiles) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.58 | juniAtm1483ProfileMIB | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1 | juniAtm1483ProfileObjects | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1.1 | juniAtm1483Profile | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1.1.1 | juniAtm1483ProfileTable | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1.1.1.1 | juniAtm1483ProfileEntry | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1.1.1.1.2 | juniAtm1483ProfileSetMap | Juniper-ATM-1483-Profile-MIB |